Crown DCi 8|600DA Dante-enabled amplifier with DSP-2/4/8Ω and 70/100V operation. 8 channels, 600W/ch.

Crown DCi 8|600DA Dante-enabled amplifier with DSP, network control/ monitoring, GPIO, 2/4/8Ω and 70/100V operation. 8 channels, 600W/ch.

The Crown DCi 8|600DA is one of the Crown DriveCore Install DA Series. It is a Eight-channel, 600W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V. For applications requiring Dante or AES67 networked audio it is the perfect unit to use. It is designed for providing a balance combination of channel count, output power and speaker load flexibility that works alongside with proprietary DriveCore® technology for maximum efficiency and admirable audio quality. The DCi DA Series comes with network control/monitoring, a high-powered DSP with JBL speaker tunings and the ability to drive 70V and 100V, 2/4/8/16 ohm speaker loads. The Crown DCi 8|600DA amplifier is perfect for installations, that have standardized on Dante for networked audio transport, because of its advanced capabilities and support for Dante Domain Manager.

Features

INTEGRATED DANTE™ / AES67 NETWORKED AUDIO – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. Includes support for Dante 4.0 firmware for integration with Dante Domain Manager.

NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers.

PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system.

DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:
LevelMAX Limiters
Input/Output EQ
Crossover
Delay
Matrix Router
Speaker Line Monitoring

- Redundant, independent Dante / AES67 ports

•   Primary & Secondary
•   Will accept 48khz or 96khz
•   Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz)

- Audio Architect Control and Monitoring

- DriveCore Amplifier Technology

- Universal PFC Power Supply

- DSP

•   48kHz processing
•   20 Presets
•   Input router

- High, medium, and low priority inputs

•   Input delay up to 2s
•   Input EQ
•   Crossover
•   Output EQ
•   Output Delay up to 100ms
•   LevelMAX limiter
•   Load Monitoring

- Pilot tone

•   Normal
•   Burst

- Continuous Load Monitoring

- Sweep Load Monitoring

•   Channel Auto-Standby
•   Speaker Tunings

- Aux-Port

•   Sleep contact closure
•   Amp Status output

- Removable air filters

- Front panel LED indicators

- AES67 Compatible