DBX 16-Channel Personal Monitor Controller PMC16

DBX 16-Channel Personal Monitor Controller PMC16

Vendor: DBX
DBX 16-Channel Personal Monitor Controller PMC16 The PMC16 by DBX is a digital remote control consisting of a monitor mixer, a reverb effect processor, and a global processing and output section. This is...
$499.95 $624.00
Title
Description

DBX 16-Channel Personal Monitor Controller PMC16

The PMC16 by DBX is a digital remote control consisting of a monitor mixer, a reverb effect processor, and a global processing and output section. This is creating an audio chain akin to a traditional live sound monitoring system and puts it in the hands of the on-stage musician, permitting each on-stage musician to tailor their own personalized mix and permits the system engineer to focus on the front of house mix. The PMC16 Controller allows for monitoring with headphones, in-ear monitors, powered monitors, or traditional wedge monitors designed to be used with the DBX TR1616 or any other BLU link compatible device.

The PMC16 Controller has Setup & Live modes of operation. Setup mode refers to the Setup Wizard and menus, that you can see when the Wizard button is pressed. This mode is for the system engineer for initially creating the configuration and set global options. Live mode refers to normal operation and it consists of all parameters pertaining to the mix. Live mode consists of 4 pages, which include the Levels page, the Meters page, the Pan page, and the Effects page. Each musician can create their own mix by adjusting each instrument’s gain, placement in the stereo field, and front to back spatial placement, using these four pages. Channel muting and soloing are available for helping each musician focus on channels that require attention or channels which should be removed from the mix.

  • 16-channel monitor mixer with level, pan, mute, solo, and reverb send control
  • 16 preset locations for mix & configuration recall
  • LCD display with 16-channel metering
  • Built-in Lexicon reverb
  • dbx PeakStopPlus limiting
  • Global high & low EQ
  • Global master level control
  • Global stereo width control
  • BLU link high bandwidth, fault-tolerant digital audio bus
  • XLR & 1/4" stereo or mono outputs
  • 1/8" & 1/4" headphone outputs
  • Setup wizard for easy configuration
  • Supports 48 & 96 kHz sampling rates
  • Channel linking, grouping, & multi-select capabilities
  • Supports up to 60 PMC16s on a single BLU link ring
  • Built-in sturdy mic stand mount
  • USB port for firmware updates
Specifications

Dbx PMC16 Specs

  • Frequency Response: +0/-0.2 dB, 20 Hz to 20 kHz (Measured at 0 dBu output level)
  • Dynamic Range: > 108 dB unweighted 22 Hz to 22 kHz bandwidth
    > 112 dB A-weighted
  • THD + N: < 0.005%, 20 Hz to 20 kHz (Measured at 0 DBU output level)
  • Crosstalk: < 97 dB, 20 Hz to 20 kHz
  • Bit Depth: 24-bit
  • Sample Rate: 48 kHz or 96 kHz
  • Nodes: 60 maximum
  • Latency: 4/Fs (0.08 ms @ 48 kHz, 0.04 ms @ 96 kHz) per node
  • Outputs: Analog: XLR & 1/4"
    Headphone: 1/8" & 1/4"
  • Output Level: 20 dBu maximum
  • Output Impedance: 40 Ω
  • Power: 900 mW per channel at 50 Ω impedance (1/8" and 1/4" jacks are in parallel)
  • Adapter: PS0920DC-01 (100 to 240 VAC, 50/60 Hz)
  • Power Consumption: 18 W
  • Power Requirements: 9 VDC, 2.0 A
  • Connector: 2 x RJ-45 Ethernet
  • Cable Length: 328' (100 m) between devices (CAT5e cable)
  • Dimensions (H x W x D): 2.12 x 11.31 x 4.81" (5.4 x 28.7 x 12.2 cm)
  • Weight: Main Unit: 2.26 lb (1.03 kg)
    Power Supply: 0.31 lb (0.14 kg)

Packaging Info

  • Package Weight: 4 lb

Related Product

Prev Next