Radial HotShot 48 Phantom Power supply and footswitch toggles condensor mic

Radial HotShot 48 Phantom Power supply and footswitch toggles condensor mic

Stage Toggle for Condenser Mics

The Radial HotShot 48 48V is a condenser microphone switcher that is professionally created for silent operation on stage, which allows an artist to power their vocal mic and reroute it for feeding the stage monitoring system for communicating with other band members or technicians at the press of a footswitch. LED indicators are designed for displaying the active output, and the footswitch itself is possible to be configured for latching or momentary action. At the same time, the Radial HotShot 48 is specifically designed for addressing the issues during the time of switching the condenser microphone outputs, it is working equally well with dynamic mics also.

Silent condenser mic switching

Passive audio switchers are occasionally creating an audible pop at the time of switching that is possible to be heard through the PA system, which is disrupting the performance. This is possible to be caused by the introduction of phantom power or by stray DC offset from any powered device connected to the switcher. The Radial HotShot 48 is also designed emplaying active circuitry and a time delay microcontroller for silent switching under any conditions, this allows the user to use the condenser or dynamic microphones with no noise whatsoever. A five millisecond delay is introduced at the time of switching relay is activated, short enough to go unnoticed by the artist, but long enough for any DC leakage to dissipate, preventing audible noise and ensuring seamless switching during any performance.

• Provides 48V phantom power for condenser microphones
• Redirects mic signal to communicate with band members and techs
• Footswitch can be configured as a latching or a momentary switch
• Silent switching with no pops or clicks through the PA system