Symetrix EDGE Frame - Programmable DSP for Commercial use ( 80-0204)

Symetrix EDGE Frame - Programmable DSP for Commercial use ( 80-0204)

Vendor: muzeek
Symetrix EDGE Frame, is only the frame, as all cards are sold separately. If you want an extremely flexible and pretty powerful DSP processor, this is the unit for you EdgeA Powerful DSP...
$3,384.00
Title
Description

Symetrix EDGE Frame, is only the frame, as all cards are sold separately. If you want an extremely flexible and pretty powerful DSP processor, this is the unit for you

Edge
A Powerful DSP Featuring Flexible I/O Configuration
4 I/O Expansion Card Slots
Optional 128 Channel (64×64) Redundant Dante
On-board Ethernet and Dante Network Switches

 

Total Input/Output Flexibility. When a preconfigured DSP just won’t do, Edge provides four versatile option card slots enabling unique I/O configurations – aligning the hardware with the exact system requirements. Optional cards support analog and AES-3 digital I/O as well as special purpose interfaces including USB, AEC, VoIP, and analog telephone.

Dante™ in Our DNA.  Edge DSPs are equipped with an optional factory installed 128 (64×64) redundant Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories – including third party Dante-enabled microphones, loudspeakers, power amps, and mixing consoles. And an option without Dante provides even more accessible DSP pricing for standalone systems.

On-board 10/100 and Gigabit Switches.  Unique to Symetrix Radius and Edge DSPs, built in switches lower system cost, reduce or eliminate the need for peripheral switches, and increase system reliability.

Unlimited Programming Flexibility.  Edge is programmed using Composer – Symetrix’ award winning open-architecture CAD application. Unique to Composer is the ability to natively configure Symetrix and select third party Dante hardware – thereby eliminating the confusion of multiple or redundant software applications. Learn more about Composer here.

Control Made Easy.  Multiple control options include low-cost Symetrix ARC wall panels and an easy to generate SymVue Windows virtual GUI. The human readable Composer Control Protocol supports programming of third-party touch screens and control devices.

An Embedded Web Server for Status and Even More Control.  Edge’s embedded web server displays I/O levels, diagnostics data, and hosts ARC-WEB – a browser-based interface for smart phones, tablets, and computers 

SPECIFICATIONS

eneral Specifications
Processors 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
Raw processing capacity 400 MIPS, 1.6 GFLOPS.
Sampling Rate 48 kHz, ± 100 ppm.
Frequency Response (A/D/A) 20 Hz – 20 kHz, ± 0.5 dB.
Dynamic Range (A/D/A) > 114 dB, A-weighted.
Channel Separation (A/D/A) > 108 dB @ 1 kHz, +24 dBu.
Latency (A/D/A) 0.88 mS, inputs routed to outputs.
Delay memory 174 mono seconds per Edge frame.
Analog control inputs 0-3.3 VDC.
Recommended external control potentiometer 10k Ohm, linear.
Logic outputs Low (0V) when active, pulled high (5V) when inactive.
Logic output maximum external power supply voltage 24 VDC.
Logic output maximum external power supply current sinking 50 mA.
Logic output maximum output current 10 mA.
RS-232 accessory serial I/O 38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight-through, only pins 2, 3, and 5 required.
RS-485 serial I/O 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
Ethernet Cable Standard CAT5, maximum device to device length = 100 meters.
Dante Cable Standard CAT6, maximum device to device length = 100 meters.
ARC Cable Standard CAT5, distance dependent upon load and number of devices
Maximum devices per system 32 units per Site File.
Maximum stored presets 1000
Models EDGE Frame, EDGE Frame Dante

Related Product

Prev Next