Atlona AT-UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE
Vendor: Atlona
Available
Atlona AT-UHD-EX-100CE-TX-PD 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter with Ethernet, Control, and PoE
The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter designed for HDMI transmission with a distance up to 330 feet (100 meters) over category cable with RS-232 control pass-through and Ethernet. It is able to transmit video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The Atlona AT-UHD-EX-100CE-TX-PD is is HDCP 2.2 compliant and capable of supporting EDID communication. The transmitter is housed in a quarter rack width metal enclosure designed for an easy rack mounting with rear panel I/O ports for uncluttered wire management. With the use of Power over Ethernet this is externally powered, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, that includes the AT-UHD-SW-5000ED, AT-UHD-CLSO-612ED, and AT-UHD-CLSO-840.
The Atlona AT-UHD-EX-100CE-TX-PD transmitter is making the system design simple when powered by an Atlona switcher with HDBaseT inputs, reducing the complexity and cost by eliminating the need for a power supply. It can also be paired with the AT-HDVS-200-RX scaling receiver and the AT-UHD-EX-100CE-RX-PSE receiver, same delivering PoE. Installer-friendly features include rack-mountable form factor that is allowing four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.
Applications
This transmitter is ideal for use in applications where:
- HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table
- 4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design
AT-UHD-EX-100CE-TX-PD | Transmitter | 330 feet (100 meters) |
4K/60 4:2:0 4K/24 HDR10 |
HDMI RS-232 Ethernet |
Remotely powered by AT-UHD-EX-100CE-RX-PSE or Atlona switcher | SW-5000ED and CLSO Series with HDBaseT inputs |
FEATURES
4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling
- Compatible with Ultra High Definition sources and displays
- Full support of 4K/UHD streaming services and playback devices
HDCP 2.2 compliant
- Adheres to latest specification for High-bandwidth Digital Content Protection
- Allows protected content stream to pass between devices
Supports 4K HDR10 @ 24 Hz
- Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)
Remotely powered via PoE (Power over Ethernet)
- IEEE 802.3af PoE Powered Device (PD)
- Power for transmitter is supplied by receiver over HDBaseT
- Saves time and integration costs
AV, Ethernet, power, and control over HDBaseT
- Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable
- Eliminates multiple cable runs between source, control system, router, and display
Extended distance HDMI extension
- Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable
- Uses easy-to-integrate category cable for low-cost, reliable system installation
Extends RS-232, CEC, and Ethernet control signals*
- Control signals travel over HDBaseT link to device for maximum control system flexibility
- Simplifies integration of source, control system, and display
- * The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.
Rear panel I/O connectors
- Placement of ports on rear panel simplifies wire management
- Saves installation time and eliminates clutter
Multi-channel audio compliant
- Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™
- Allows any multi-channel audio stream to be used within a professional audio system
Field-updatable firmware
- Front panel USB port provides an easy means for device updates
- Ensures long-term system return on investment
Front panel Power and Link status LEDs
- LED indicators provide power and HDBaseT link status information
- Provides easy setup and troubleshooting
Low-profile, 1 inch (25 mm) high quarter rack-width enclosure
- Easy installation into racks and confined spaces
- Keeps devices out-of-sight when placed in public spaces
Included accessories
- User guide, mounting brackets
Award-winning 10 year limited product warranty
- Ensures long-term product reliability and performance in residential and commercial systems
- Specify, purchase, and install with confidence
Resolution | |||||||||||
Video | 4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, 1080p@23.98/24/25/29.97/30/50/59.94/60Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i | ||||||||||
VESA | 2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 | ||||||||||
Colorspace | YCbCr, RGB | ||||||||||
Chroma Subsampling | 4:4:4, 4:2:2, 4:2:0 | ||||||||||
Color Depth | 8-bit, 10-bit, 12-bit | ||||||||||
HDR | 4K HDR10 @ 24Hz, 4:2:0 chroma subsampling, 10-bit color (Source signal delivered from Ultra HD Blu-ray as 4K @ 24Hz 4:2:2. Not compatible with HDR10 @ 60Hz.) |
Audio | |||||||||||
Formats | PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby Digital, DTS 5.1, Dolby Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X | ||||||||||
Sample Rate | 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz | ||||||||||
Bit Rate | up to 24-bit |
Distance | |||||||||||
CAT5e/6 @ 4K | up to 70 meters | up to 230 feet | |||||||||
CAT6a/7 @ 4K | up to 100 meters | up to 328 feet | |||||||||
CAT5e/6 @ 1080p | up to 100 meters | up to 328 feet | |||||||||
HDMI IN/OUT @ 4K | up to 5 meters | up to 15 feet | |||||||||
HDMI IN/OUT @ 1080p | up to 10 meters | up to 30 feet |
Signal | |||||||||||
Bandwidth | 10.2 Gbps | ||||||||||
CEC | Pass through | ||||||||||
HDCP | Supports up to 2.2 |
Temperature | |||||||||||
Operating | 0°C to 50°C | 32°F to 122°F | |||||||||
Storage | -20°C to 60°C | -4°F to 140°F | |||||||||
Humidity | 20 to 90% non-condensing |
Power | |||||||||||
Consumption | 15.2W (when paired with RX) | ||||||||||
Supply | Input: AC100~240V 50/60Hz Output: DC 48V/0.83A |
Dimension | |||||||||||
H x W x D | 25 x 109 x 127 (mm) | 0.98 x 4.29 x 5 (inch) | |||||||||
w/ears | 27 x 119 x 127 (mm) | 1.06 x 4.69 x 5 (inch) |
Weight | |||||||||||
Unit | 0.39kg | 0.86lbs |
Certification | |||||||||||
Power Supply | CE, FCC, RoHS, cULus, RCM, CCC | ||||||||||
Product | CE, FCC |