Williams Sound FM ADA Compliance Kit - Rechargeable FM SYSTEMS FM ADA KIT 37 RCH

Vendor: Williams Sound
Descriptions Williams Sound FM ADA Compliance Kit - Rechargeable FM SYSTEMS FM ADA KIT 37 RCH Same as FM ADA KIT 37, plus charger. The Williams Sound FM ADA KIT 37 RCH gives everything you...
$1,485.00 $1,650.00
Title

Williams Sound FM ADA Compliance Kit - Rechargeable FM SYSTEMS FM ADA KIT 37 RCH

Same as FM ADA KIT 37, plus charger. The Williams Sound FM ADA KIT 37 RCH gives everything you need to accommodate individuals for hearing accessibility in a small-group settings such as libraries, conference rooms and information desks. This Williams Sound FM ADA KIT 37 RCH portable is very easy-to-use FM system operates at 72-76 MHz on one of 17 selectable channels. This single kit satisfies ADA requirements for multiple-room facilities.

NOTE: The FM ADA Compliance Kit is approved by the FCC for operation in U.S. markets. The system cannot be used in all countries. Check with your government´s radio regulations for 72-76 MHz operation.

Disclaimer: FCC rules limit use of this equipment to auditory assistance.

Williams Sound FM ADA KIT 37 RCH Main Features

  • Simple set-up and operation
  • PPA T36 transmitter
  • 150’ operating range
  • 100 hours receiver battery life
  • Lifetime PLUS Limited Warranty (90 days on accessories)
  • Meets new 2010 ADA accessibility guidelines
  • Made in USA

Williams Sound FM ADA KIT 37 RCH System Includes:

  • (1) PPA T46 transmitter
  • (4) PPA R37 receivers
  • (4) HED 027 headphones
  • (1) MIC 090 lapel microphone
  • (1) MIC 049 desktop conference mic
  • (1) CCS 029 system carry case
  • (2) NKL 001 neckloops
  • (1) BAT KT6 charger kit
  • (5) BAT 026-2 AA rechargeable batteries
  • (1) CHG 3502 Battery Charger
  • (1) IDP 008 ADA wall plaque

CHG 3502

Dimensions:

4-7/8"L x 3-7/8""W x 2"H (12.4 cm L x 9.8 cm W x 5.1 cm)

Shipping Weight:

1.1 lbs (0.5 kg)

Enclosure:

Black, ABS plastic

Charger Power:

Input: 6 VDC, 300mA, Center Positive.

Output: 100mA per bay.

Power Supply:

Williams Sound TFP 041 (US) orTFP 030 (International).

Input: 100-240 VAC, 50-60Hz, 0.5-0.3 A

Output: 6 VDC, 1.5 A.

Charging Time:

16 hours nominal *

Unit Capacity:

2 Units

Indicators:

2 Red LEDs - one for each bay. LEDs are lit when charging.

Warranty:

2-year

Approvals:

CE, FCC, RoHS


HED 027

Style Heavy-duty, folding, mono headphones
Plug 3.5mm mono
Cord 39"
Driver Size 40 mm
Nominal Impedance 16Ω
Freq. Response 20 - 20kHz
Weight 102g
Max Power Input 100 mW
Sensitivity 96 dB @ 1kHz
Replacement Pads EAR 035 (one pair)


IDP 008

10-3/8" (L) x 6-¼" (W) x 1/8" (H)

MIC 049

Phantom Power 1.2 - 10 VDC
Impedance 1.5 kΩ
Operating Voltage 1.2 - 10 VDC
Freq. Response 100 Hz - 8 kHz
Signal-to-Noise Ratio [gt]60 dB
Pick-Up Pattern Omni-directional
Element Electret-condenser
Sensitivity -38 dB ± 3 dB
Approvals RoHS
Color Black
Weight 0.08 lbs
Plug 3.5 mm mono
Cord Length 36”
Approvals RoHS
Warranty 90 days


MIC 090

Element Electret-Condenser
Pick-Up Pattern Omni-directional
Phantom Powered No
Impedance 1.5 kΩ
Frequency Response 20 Hz – 18 kHz
Dynamic Range 79 dB
Sensitivity -56 ± 3 dB
Signal-to-Noise Ratio 63 dB
Plug 3.5 mm, right-angle
Cord Length 39”
Color Black
Weight 0.05 lbs
Replacement Windscreen WND 006
Replacement Clip CLP 090
Approvals RoHS
Warranty 90 days


PPA R37

Dimensions: 4.1" x 2.85" x 1.38" (104 x 72 x 35mm)
Weight: 4.6oz (130g) with batteries. 2.6oz (73g) without batteries
Color: Black
Battery Type: (2) AA Alkaline or 2 x AA NiMH
Battery Life: Two (2) AA non-rechargeable alkaline batteries (BAT 001), approx. 50 hrs
(2) AA rechargeable NiMH batteries (BAT 026), 1500 mAh, approx. 32 hrs
Current Consumption: 52mA nominal
Temperature Range: – 0 to 50C
Channels 17, accessed via seek button in battery compartment
Operating Freq.: 72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz*
Intermediate Freq.: 75 kHz
FM Deviation: 75 kHz
De-Emphasis: 75 µS
LED Indicator: Power: Green; Low Battery: Flashes Green
AFC Range: ± 120 kHz
Sensitivity: 2 µV at 12 dB Sinad with squelch defeated
Input Overload: 100 mV
Frequency Response: 200 – 15 kHz
Modulation: FM, +/- 75 kHz peak deviation
Signal-to-Noise Ratio: 65 dB min @ 100 uV
Receive Antenna: Integral with earphone/headphone cord
Audio Output: 35 mW max, peak into 16 ohms
Output Connector: 3.5 mm stereo/mono phone jack
Earphone: Earbud-type with foam cushion, 3.5 mm plug, 32 Ω
Auto Shut-off Enters sleep mode after approx 6 mins of no RF signal
Approvals: FCC, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty, 90 Days on most accessories.


PPA T46

Dimensions: 4.1” L x 2.8” W x 1.1” D (104 mm x 71 mm x 28 mm)
Weight: 2.6 oz (74 g), no batteries
Color: Black/Silver
Enclosure Material: Shatter-resistant PC/ABS plastic with textured scratch-resistant aluminum faceplate
Battery Type options: Two (2) AA 1.5 V non-rechargeable Alkaline batteries (BAT 001-2), 75 mA nominal current drain, up to 30 hours battery life
Two (2) AA 1.5 V NiMH rechargeable batteries (BAT 026-2), 75 mA nominal current drain, up to 20 hours battery life per charge, recharges in 14–16 hours, uses CHG 3502 or CHG 3512 Charger
Operating Frequencies: Selectable, 17 channels, 72.1 – 75.9 MHz*. Switchable 8 or 17 Channel Mode. (8-channel mode setting corresponds with PPA R35-8 receiver channels)
Stability: ± .005%, frequency synthesized, crystal reference, PLL
Modulation: Wide-band FM, 75 kHz peak, 75 µS pre-emphasis
RF Output: 80 mV/m at 3 m (max. allowed by FCC rules)
Range: 150 ft/45 m
Frequency Response: 180 Hz to 13 kHz, ± 3 dB at 1% max. THD
Signal-to-Noise Ratio: 65 dB (typical) transmitted
Transmit Antenna: Integral with microphone cord
Microphone: Electret type, 3.5 mm mono plug
External Display: OLED for status and menu information. Status: Ch/Freq, Mic Audio Level, Auxiliary Input Audio Level, Battery Status, Mic Mute, Channel Lock, Dual-Preset mode. Menu: Ch/Freq display mode select, Volume, Aux Input, Compression, 17 or 8-channel mode, screen time out, screen brightness, restore default settings
External Controls: Momentary push button: push and hold 3 seconds for power On/Off, push and release for microphone mute On/Off. “Up”, “Down” and “Menu” buttons for accessing and changing transmitter settings. Battery type switch (Alkaline or NiMH) located behind the battery compartment door
External Indicators: Power LED - Green, flashes when battery is low
Mic Input: 3.5 mm mono jack with electret mic bias, adjustable gain with 25 dB range
Aux Input: 2.5 mm stereo jack, adjustable gain with 60 dB range
Audio Compression: 1:1 (off) or 2:1 (on) selectable in menu
Compatible Receivers: PFM R31, PFM R32, PFM R33, PFM R36, PPA R35, PPA R37, PPA R35-8, PPA R1600,
Approvals/Directives: FCC, Industry Canada, RoHS, WEEE
Warranty: Lifetime PLUS Limited Warranty, 90 Days on most accessories.

 

The PPA T46 is FCC Part 15 compliant. Effective July 11, 2016, the FCC has mandated tighter emissions limits on auditory assistance transmitters (72-76 MHz) manufactured or imported after this date to help avoid interference with and/or degradation of other airborne signals (All products manufactured prior to July 11, 2016, are compliant). Williams Sound FM transmitters – PPA T46, PPA T27 and PPA T45 (all models) – all have received a Grant of Certification from the FCC and are fully compliant/approved under this new mandate.