Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless TX/RX Transmitter/ Receiver
Vendor: Teradek
Available
Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless TX (Transmitter) / RX (Receiver) with Battery Mounts
WIRELESS TX/RX KIT
The Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Video Kit comes with both Bolt 1500 12G-SDI/HDMI wireless transmitter and Bolt 1500 12G-SDI/HDMI wireless receiver, it is a professionally designed wireless video system capable of supporting video at resolutions up to 4K at 60 fps. Video transmission is supported at a distance of up to 1500' line-of-sight without having any losses. The transmitter is capable of sending videdo up to six receivers and also made compatible for use along with any model in the Bolt 4K line. The transmitter comes featuring a 12G-SDI input, an HDMI 2.0 input, and a 12G-SDI loop-through output. The receiver comes featuring two 12G-SDI inputs and one HDMI 2.0 input. With these, you are made capable of remotely pair units, configure their settings, and also utilize all of Bolt 4K's features from any iOS smartphone or tablet. The transmitter comes with a mounting holes on each side for use by a Gold Mount or V-mount battery plate (available separately) so it is created for mounting on the back of camera. Included in the kit are a 3/8"-16 light stand adapter, a hot shoe adapter, two 18" HDMI cables, two 18" 2-pin connector to D-Tap cables, a 3' USB Type-A to micro-USB Type-B cable, two 18" 12G-SDI BNC cables, a 6' PSU 2-pin connector to 30W AC adapter cable, nine 2 dBi Wi-Fi 2.4/5.8 GHz antennas, a large case that fits a transmitter and two receivers, a 9.8 x 5.9" vinyl zipper bag, and a 9.8 x 9.1" vinyl zipper bag.
- Transmits uncompressed video in 1080p and 2160p at 60 fps with less than 1 ms of delay
- Compliant with the HLG, PQ, and HDR-10 standards
- Send start/stop flags, timecode, and other ancillary data over the wireless link
- Bolt app uses Bolt 4K's integrated Bluetooth
- Multiple mounting options with 1/4"-20, 3/8"-16, and M3 holes
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WIRELESS TX
With the Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Transmitter, you are made capable to transmit 4K60 video signals from a 12G-SDI or HDMI input to any Bolt 4K receiver having only less than 1 ms of latency. The transmitter unit is possible to be secured to a camera or other SDI/HDMI video source via a built-in 1/4"-20 threaded hole, as well as two M3 threaded holes. The four included antennas provide a powerful signal for up to a 1500' line of sight.
- HDMI and 12G-SDI inputs, with 12G-SDI loop-through output
- 1500' line-of-sight range
- Compatible with any Bolt 4K receiver
- Up to 48 kHz 24-bit PCM embedded audio supported
- SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
- 1/4"-20 and M3 mounting points
- 2-pin LEMO-type power input
- Built-in display with joystick navigation
- Micro-USB port for upgrades
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
WIRELESS RX
With the Teradek Bolt 4K 1500 12G-SDI/HDMI Wireless Receiver, you are madee capable to receive visually lossless 4K60 video signals from any Bolt 4K transmitter having with less than 1 ms of latency and send them out two 12G-SDI outputs or one HDMI output. The receiver unit is possible to be secured to a camera or other SDI/HDMI video source via built-in 1/4"-20 or 3/8"-16 threaded holes. The five included antennas provide a powerful signal that can receive from up to a 1500' line of sight.
- Two 12G-SDI outputs and one HDMI output
- 1500' line-of-sight range
- Compatible with any Bolt 4K transmitter
- Up to 48 kHz 24-bit PCM embedded audio supported
- SDI ancillary data support for metadata, timecode, and start/stop flags from certain camera manufacturers
- 1/4"-20 and 3/8"-16 mounting points
- 2-pin LEMO-type power input
- Built-in display with joystick navigation
- Micro-USB port for upgrades
Teradek 10-2110 Wireless TX & RX Kit (No Mount)
- Teradek 10-2110-G - Wireless TX & RX Kit (Gold Mount)
- Teradek 10-2110-V - Wireless TX & RX Kit (V-Mount)
Teradek 10-2111 Wireless TX (No Mount)
- Teradek 10-2111-G - Wireless TX (Gold Mount)
- Teradek 10-2111-V - Wireless TX (V Mount)-Teradek 10-2112 -
Teradek 10-2112 Wireless RX (No Mount)
- Teradek 10-2112-G - Wireless RX (Gold Mount)
- Teradek 10-2112-V -Wireless RX (V-Mount)
TRANSMITTER
WirelessWireless Range | 1500' / 457.2 m (Line-of-Sight) |
# of Channels | 14 (40 MHz) |
Channel Bandwidth | 40 MHz |
Frequency Range | US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz US: 5.27 to 5.67 GHz |
Latency | < 1 ms |
RF Power | 19 dBm |
Wi-Fi | 5 GHz |
Wireless Video Compression | Uncompressed |
Antenna Ports | 4 x RP-SMA Female |
Video Connectors | 1 x BNC (12G-SDI) Input 1 x HDMI (HDMI 1.4 / HDMI 2.0) Input 1 x BNC (12G-SDI) Loop Output |
Other I/O | 1 x USB Micro-B USB 2.0 Input |
Embedded Audio | HDMI: 2-Channel SDI: 2-Channel |
Encryption | 256-Bit AES |
Broadcast System Compatibility | NTSC, PAL |
Video Format | SDI/BNC: 1080p/DCI 4K 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080p/DCI 4K 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps 1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps 576p/576i/480p/480i HDMI: 1080p/DCI 4K 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080p/DCI 4K 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps 1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps 576p/576i/480p/480i |
Audio Format | 2-Channel 24-Bit 48 kHz PCM Audio |
Timecode Support | Yes |
LUT Support | Yes |
Built-In Battery | None |
Power Connector | 1 x 2-Pin LEMO (6 to 28 VDC) Input |
Power Consumption | (20 W) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mounting | 1 x 1/4"-20 Female 2 x M3 Female |
Materials | Aluminum |
Dimensions | 5.2 x 3.58 x 1.06" / 132 x 91 x 27 mm |
Weight | 12.7 oz / 360 g 14.39 oz / 408 g (With 4 x Antennas) |
RECEIVER
WirelessWireless Range | 1500' / 457.2 m (Line-of-Sight) |
# of Channels | 14 (40 MHz) |
Frequency Range | US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz US: 5.27 to 5.67 GHz |
Latency | < 1 ms |
RF Power | 17 dBm |
Wi-Fi | 5 GHz |
Wireless Video Compression | Uncompressed |
Antenna Ports | 5 x RP-SMA Female |
Video Connectors | 2 x BNC (12G-SDI) Output 1 x HDMI (HDMI 1.4 / HDMI 2.0) Input |
Other I/O | 1 x USB Micro-B USB 2.0 Input |
Embedded Audio | HDMI: 2-Channel SDI: 2-Channel |
Encryption | 256-Bit AES |
Broadcast System Compatibility | NTSC, PAL |
Video Format | SDI/BNC: 1080p/DCI 4K 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080p/DCI 4K 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps 1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps 576p/576i/480p/480i at 50 fps HDMI: 1080p/DCI 4K 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080p/DCI 4K 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps 1080PsF 4:2:2 YCC 10-Bit at 23.98, 24, 25, 29.97, 30 fps 1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps 1080i/720p 4:2:2 YCC 10-Bit at 50, 59.94, 60 fps 1080i/720p 4:4:4 RGB 8-Bit at 50, 59.94, 60 fps 576p/576i/480p/480i |
Audio Format | 2-Channel 24-Bit 48 kHz PCM Audio |
Timecode Support | Yes |
LUT Support | Yes |
Built-In Battery | None |
Power Connector | 1 x 2-Pin LEMO (6 to 28 VDC) Input |
Power Consumption | (18 W) |
Operating Temperature | 32 to 104°F / 0 to 40°C |
Mounting | 1 x 1/4"-20 Female 1 x 3/8"-16 Female |
Materials | Aluminum |
Dimensions | 5.47 x 4.41 x 1.06" / 139 x 112 x 27 mm |
Weight | 15.52 oz / 440 g 17.5 oz / 496 g (with 5 Antennas) |