Lectrosonics ALP650H/E ANT LPDA, SHARK FIN STYLE, AMPLIFIED, 640-870MHz

Lectrosonics ALP650H/E ANT LPDA, SHARK FIN STYLE, AMPLIFIED, 640-870MHz

The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that is capable of providing a useful directional pattern over a broad frequency bandwidth. Many “gain antennas” (those designs that comes along with a directional pattern) are made limited in bandwidth, which makes them awkward for use in multi-channel wireless systems and comes with frequency agile wireless systems. With VSWR below 2:1 from 450 to 862 MHz, the broad bandwidth of the ALP Series is capable of covering a broad section of the band used for Lectrosonics wireless microphone and IFB systems, yet still capable of providing the directional pattern needed to cover long distances.

All ALP Series antennas are professionally constructed out of 1/8” FR4 fiberglass circuit board material and are extremely rugged. The ALP620 and ALP650 Series antennas come including a protective cover over the BNC connector, this makes them suited for field production, and the more economical ALP500 is better suited for indoor installation at the same time. The perforated body of the ALP620 is making it resistant to wind loading outdoors. The ALP650 models are “receive only” models, that comes featuring a built-in amplifier with adjustable gain for use along with long coaxial cable runs and/or RF splitters.

The antennas is possible to be mounted horizontally or vertically by removing four screws and repositioning the mounting block. This is helping to position the antenna away from nearby reflective surfaces for preserving more of the natural pattern of the LPDA design.

The mounting block on all ALP Series antennas is capable to accept three common sizes of threads:

• 1/4"-20 (tripod mount)
• 3/8"-16 (pro tripod mount)
• 5/8"-27 (mic stand)

A 3/8"-16 stud (Part #28769) is included with all ALP Series antennas.

• Pattern Gain:
• +7dBi (isotropic)
• +4dBd (over dipole
• RF Gain:
• +12 dB with 0dB attenuator
• +8 dB with 4dB attenuator
• +5 dB with 7dB attenuator
• Third Order Intercept: +27 dBm @ input (+41 dBm output)
• Weight: 12 oz. (all versions)
• Power Requirements: 8V to 16V DC at the input jack; auto reset poly fuse protection circuit; constant power switching supply
• 8V DC (125 to 145 mA)
• 12V DC (83 to 106 mA)
• 14.4V DC (69 to 89 mA)
• 16V DC (60 to 80 mA)
• Phantom Powering: DC voltage supplied via coaxial cable by UMC16B, VRM input jack or BIAS-T power inserter (70 to 80 mA)
• Power Consumption: 1.2 Watt nominal (switching regulator)