Earthworks IML12-W LumiComm™ Touch Ring Cardioid Installation Microphone with 12" Gooseneck, White - 20Hz-30kHz

Earthworks IML12-W LumiComm™ Touch Ring Cardioid Installation Microphone with 12" Gooseneck, White - 20Hz-30kHz

The silver IML12-W Gooseneck series Microphone with LumiComm Touch Ring designed by Earthworks is to capture audio. The IML12-W is used in fixed sound installations for audio applications such as surveillance, boardrooms, teleconferencing, government facilities, lecture halls, and more. The IML series can be custom mounted in a table and offers an excellent sound quality, flexibility and ease of installation.

The IML12-W is featured with a cardioid polar pattern and has a frequency response of 30 Hz to 30 kHz. The microphone is powered by 48V phantom power. The IML12-W is made with a programmable touch sensor and a programmable dual color LED light ring that is powered from an external power source of 7 to 28 VDC. The microphone is featured with a small head and flexible mini-gooseneck that permit it to be precisely positioned after installation.

• 30kHz frequency response
• Uniform frequency response on or off axis
• More gain before feedback
• Picks up almost no sound from the rear of the microphone
• Near perfect polar pattern
• Gooseneck allows quick and easy positioning
• Programmable touch sensor output
• Programmable dual-colored LED light ring
• Light ring engineered for a wide supply voltage range (From 8V to 28V regulated supply—No external LED resistors needed)
• Touch sensitive flange that provides a pull down touch sensor output (Active Low)
• Light diffuser that houses 10 LEDs providing side illumination (5 Green, 5 Red)
• Current consumption 85mA
• Supplied with either a 5 pin RJ45 connector or a 5 pin Phoenix connector
• Primary applications include teleconferencing, distance learning, surveillance, boardrooms, government facilities, and ambient room miking

• Frequency Response: 20Hz to 30kHz
• Polar Pattern: Cardioid
• Sensitivity: 20mV/Pa (-34dBV/Pa)
• Power Requirements: 24-48V Phantom, 10mA
• Max Acoustic Input: 139dB SPL
• Output: XLR (pin 2+)
• LumiComm™ Connector: Phoenix or RJ45
• Output Impedance: 65Ω balanced (between pins 2 & 3)
• Min Output Load: 600Ω between pins 2 & 3
• Current Consumption: 85mA
• Noise: 16dB SPL equivalent (A weighted)