Alesis MultiMix 12R 12-channel 3RU mixer with 8-XLR inputs

Vendor: Alesis
Alesis MultiMix 12R 12-channel 3RU mixer with 8-XLR inputs The Alesis MultiMix 12R Rack Mountable 10-Channel, 12-Input Mixer is a professionally designed high quality, rack mountable audio mixer created for use in recording and sound...
$299.00 $399.00
Title

Alesis MultiMix 12R 12-channel 3RU mixer with 8-XLR inputs

The Alesis MultiMix 12R Rack Mountable 10-Channel, 12-Input Mixer is a professionally designed high quality, rack mountable audio mixer created for use in recording and sound reinforcement applications. The mixer comes featuring 8 mono inputs and 2 stereo paired (L/R) inputs, for having a total of 12 line level inputs with the use of balanced 1/4" TRS Phone connectors. Channels 1 through 8 feature XLR Balanced microphone inputs that comes with phantom power (global switch). Each channel is featuring a 2 band EQ (High / Low), 2 AUX sends and PAN (Balance control on stereo inputs). Additional I/O are including L/R AUX returns, L/R Tape In and Tape Out jacks with the use of RCA connectors, and L/R Main and Monitor outputs with the use of balanced 1/4" TRS connectors. Channels 1 through 8 feature Inserts for direct routing of channels through out-board effects or signal processors with the use of insert cables. The Insert points are also made suitable for use as monitor sends (using tip-sleeve 1/4" cable only). All this enclosed in a convenient rack mountable enclosure are providing sonic quality, durability and remaining portable at the same time.

Rack Mountable Enclosure
The mixer is enclosed in a 3-unit rack mountable enclosure making it a suitable road-worthy mixer for recording or sound reinforcement.

Mono & Stereo Channels
Channels 1 through 8 feature mono balanced 1/4" TRS inputs. The 2 remaining channels feature stereo paired (L/R) 1/4" TRS inputs, suitable for keyboards play-back devices and other stereo signals.

Balanced Mic Inputs
3-pin XLR female microphone inputs are featured on channels 1 through 8. All mic-preamps provide phantom power (global switched) for condenser microphones.

Insert Points
Channels 1 through 8 feature insert points for routing channels to effects or signal processors.

Total # Of Inputs 12 - Total Line Inputs
Mic/Line Inputs 12 - Balanced 1/4" TRS Phone Inputs
8 - Balanced XLR Mic Inputs
Stereo Line Inputs 2 - Stereo Paired 1/4" Phone (inputs 9,10 & 11,12)
In-Line Inputs/Returns No
AUX Sends 2 - 1/4" TRS Phone (L/R)
AUX Returns 2 - 1/4" TRS Phone (L/R)
Inserts 8 - 1/4" Phone Inserts on Channels 1 through 8
BUS (Group) Outputs Stereo Buss Only
2 Trk Master I/O Main Output: Balanced 1/4" Phone (L/R)
ALT I/O Tape In: Unbalanced RCA female (L/R)
Main Out: Unbalanced RCA female (L/R)
Monitor Outputs Monitor Out: Balanced 1/4" Phone (L/R)
EQ Section High: 12kHz +/- 15dB
Low: 80Hz +/- 15dB
Solo/Mute No
Channel Level Control Fader Control
Trim/Gain Control Sealed Potentiometers
Max Gain: +76 dB, MIC IN to MAIN OUT, balanced +80dB, MIC IN to MONITOR OUT, balanced or unbalanced
Phantom Power +48 Volt (global switch)
Metering 10 segment stereo peak indicators
Phantom and Power indicator LEDs
Frequency Response 10Hz - 65kHz +0/-1 dB (any input to any output at nominal operating levels)
-3dB Point: 125kHz
Dynamic not specified by manufacturer
Signal-to-Noise Ratio MIC IN to INSERT OUT: -128.5 dBu Equivalent Input Noise at maximum gain
Residual output noise (MASTER fader at nominal, channel faders at minimum): 12 inputs, faders and trims at unity gain, inputs terminated 150 ohms:
Total Harmonic Distortion (THD) measured with a 0 dBu signal coming into a MIC IN jack with trim set for a +15 dBu output from the insert jack
At INSERT jack: >0.0010%
At MAIN OUT: >0.0015% (+21 dBu balanced output level)
Power Requirement 120 VAC, 60Hz, 40 watts max. power consumption (U.S.A. model)
Dimensions (WxHxD) 18.97 x 5.24 x 4.13" (482 x 133 x 105 mm)
Weight 8 lbs (3.6 kg)