Focusrite REDNET A16R MKII High quality 16-channel analogue interface for Dante networks

0 DBFS Reference Levels

+18 or 24dBu (switchable)

Frequency Response

20Hz – 20kHz ± 0.1dB

THD+N

Less than -100dB (0.001) unweighted, 20Hz – 20kHz; -1dBFS input

EIN

-96dBu A-Weighted (typical)

Signal-To-Noise Ratio

120dB A-Weighted (typical)

Converter Dynamic Range

120dB A-Weighted (typical), 10Hz – 20kHz

0 DBFS Reference Levels Outputs

18 or 24dBu (switchable)

Frequency Response Outputs

20Hz – 20kHz ± 0.1dB

THD+N Outputs

Less than -100dB (0.001) unweighted, 20Hz – 20kHz; 23dBu input

Noise In Presence Of Signal

-94dBu A-Weighted (typical)

Dynamic Range

118 dB A-Weighted (typical)

Converter Dynamic Range Output

120dB A-Weighted (typical), 10Hz – 20kHz

Input To Output Or Input

Less than -100dB unweighted, 20Hz – 20kHz; 23dBu input

Output To Input Or Output

Less than -100dB unweighted, 20Hz – 20kHz; -1dBFS input

Sample Rate Range

32kHz to 216kHz

Gain Error

-0.3dB

Dynamic Range Inputs

Greater than 138dB

THD+N Inputs

Less than -130dB (0.00003)

Latency

11 to 45 samples (network and sample rate dependent)

Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit

Clock Sources

Internal or from Dante Network Master

External Word Clock Range

Nominal sample rate ±7.5

Line Inputs

2 x DB25 connectors

Line Outputs

2 x DB25 connectors

Channel Count

2 x 2 AES/EBU channels

Input (Optional DARS)

1 x Female XLR (Switchable with analogue input channels 15 and 16 at quad rates)

Output

1 x Male XLR (Duplicate of analogue output channels 15 and 16 at quad rates)

Word Clock Input

1 x BNC 75O port (switchable termination)

Word Clock Output

1 x BNC 75O port

PSU

2 x IEC Inputs with retaining clips

Network

2 x EtherCON NE8FBH, also compatible with standard RJ45 connectors

Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode

Network Locked

Green LED. When unit is following network grand master, shows valid network lock

Sample Rate

Orange LED for each: 44.1kHz, 48kHz, x2, x4

Pull Up/Down

Orange LED. Indicates that the unit is set to operate on a Dante pull up/down domain

AES/EBU Signal Indicators

2 I/O signal indicator LEDs

Clock Source

Orange LED for each

Redundant

Allows unit to connect to two independent networks

Switched

Connects both ports to integrated network switch allowing daisy-chaining