Audio Technica ATW-901A/H, System 9 Wireless System

Vendor: Audio Technica
Descriptions Audio Technica ATW-901A/H, System 9 Wireless System The System 9 VHF Wireless UniPak System which is designed for live sound reinforcement applications is the Audio Technica ATW-901A/H. The system Audio Technica ATW-901A/H consists...
$194.95
Title

Audio Technica ATW-901A/H, System 9 Wireless System

The System 9 VHF Wireless UniPak System which is designed for live sound reinforcement applications is the Audio Technica ATW-901A/H. The system Audio Technica ATW-901A/H consists of a wireless VHF receiver, a bodypack transmitter, and a PRO 8HecW headworn microphone.

Audio Technica ATW-901A/H receiver utilizes two dipole antennas for extended range, and allows you to select your VHF transmission frequency from 169.505, 170.245, 171.045, or 171.905 MHz. Audio Technica ATW-901A/H receiver features a volume control knob, a squelch control knob, a balnced XLR audio output, and an unbalanced 1/4" audio output. The ATW-901A/H receiver also includes a power cord hook to prevent accidental pull-out of the DC power supply.

The bodypack transmitter is powered by two AA batteries and includes variable microphone and instrument trim, channel selection DIP switches, a Power/Mute button, and a Unipak input connector.

Audio Technica ATW-901A/H Product Features

  • 169.505 to 171.905 MHz
  • Dipole Antenna for Extended Range
  • Channel, RF, and AF Peak Indicator LEDs
  • Balanced XLR & Unbalanced 1/4" Outputs
Overall System
Type  VHF High Band
Operating Frequencies  169.505, 170.245, 171.045, 171.905 MHz
Modulation Mode  FM
Maximum Deviation  ±10 kHz
Dynamic Range  ≥90 dB (A-weighted), typical
Operating Range  200' (61.0 m), open range environment with no   interfering  signals
Operating Temperature Range  40 to 110° F (4 to 43° C), battery performance may be   reduced at very low temperatures
Frequency Response  80 to 13,000 Hz
Receiver Specifications
Receiving System  Non-diversity, single-channel, dual-antenna system
Image Rejection  50 dB minimum
Audio Output  Nominal Output Level
 Balanced XLR: 350 mV (1 kHz modulation, 10 kHz deviation,   100-kOhm load)
 Unbalanced 1/4" (6.3 mm): 700 mV (1 kHz modulation, 10 kHz   deviation, 100-kOhm load)
Power Supply  100 to 240 VAC (50/60 Hz) to 12 VDC at 0.5 A (center   positive)  switched mode external power supply
Dimensions (W x H x D)  7.48 x 1.82 x 5.06" (190 x 46.2 x 129 mm)
Weight  12.0 oz (337 g)
Bodypack Transmitter
RF Power Output  High: 10 mW
Spurious Emission  Following federal and national regulations
Input Connections  Four-pin, Locking Connector
 Pin 1: GND
 Pin 2: INST INPUT
 Pin 3: MIC INPUT
 Pin 4: BIAS +9 VDC
Batteries  Two 1.5 V AA (not included)
Current Consumption  8 hours (alkaline), depending on battery type and use   pattern
Dimensions (W x H x D)  2.76 x 4.08 x 0.98" (70.2 x 104 x 24.9 mm)
Weight  2.8 oz (79 g) (without batteries)