Audio Technica U843R Multidirectional Microphone

Vendor: Audio Technica
Description Audio Technica U843R Multidirectional Microphone Three channel boundary cardioid condenser microphone The phantom-powered Audio Technica U843R is a Multidirectional Microphone with three cardioid condenser elements housed in a single housing, it is offering a remarkably versatile tool...
$399.00
Title

Audio Technica U843R Multidirectional Microphone

Three channel boundary cardioid condenser microphone

The phantom-powered Audio Technica U843R is a Multidirectional Microphone with three cardioid condenser elements housed in a single housing, it is offering a remarkably versatile tool for surface-mount installations. Levers on the microphone base are allowing an easy reorientation of two elements designed to offer  300° or 360° coverage. Since elements can be used and powered individually or in any combination, further flexibility is easily achieved. For example, the microphone is able to provide a figure-of-eight polar pattern, alongside two elements powered, and with a single element powered, the microphone functions as a standard cardioid boundary microphone. Repositionin and installation are extremely quick, that is made possible by the four recessed pathways on the base of the microphone that is giving the user the capability to route the cable as required for accommodating any installation requirements; no disassembly or tools are needed. The microphone is also able to offer Audio-Technica’s innovative UniGuard® RFI-shielding technology.

FEATURES

  • Three cardioid condenser elements mounted in a single housing
  • Easily reposition two elements (via levers on the microphone base) to offer 360° or 300° coverage; each element can be powered and used individually or in any combination
  • Also functions as a stereo boundary microphoneProvides full, efficient and flexible coverage—fewer microphones required
  • Small-diameter capsules near boundary eliminate phase distortion and deliver clear, high-output performance
  • Low-frequency attenuation improves sound pickup without affecting voice quality
  • Cable routes through any of four recessed pathways on the microphone base (or down for direct feed through a table surface); no tools or disassembly required
  • UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Heavy die-cast case and non-slip silicone foam bottom pad minimizes coupling of surface vibration to the microphone
  • Low-profile design with low-reflectance finish for minimum visibility
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Hemispherical Cardioid x3 (combine to omni-directional or bidirectional)
Frequency Response 70 - 16,000 Hz
Open Circuit Sensitivity -37 dB (14.1 mV) re 1V at 1 Pa
Impedance 100 ohms
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Switches The lever of elements can adjust the proper position
Dynamic Range 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight 160 g
Dimensions 20.0 mm - height ; 85.0 mm – maximum body diameter
Output Connector Without connector
Cable 7.6 m long (permanently attached to microphone), 4 mm diameter, 6 conductor, shielded cable; output end stripped and tinned for connection to electronic device
Accessories Included Soft protective pouch