Audix D2TRIO, 3 PK D2, DYNAMIC MIC 3 DVICEBP, 3 POUCH, 3-piece Drum Microphone Package

Audix D2TRIO, 3 PK D2, DYNAMIC MIC 3 DVICEBP, 3 POUCH, 3-piece Drum Microphone Package

The Audix D2 Trio is the microphone package that you need, it can miking your toms, all in one convenient package. The tailored frequency of the Audix D2 Trio response of the D2 drum microphone gives you all the punch, clarity and warmth needed for percussion without being muddy or boomy. The Audix D2 Trio also features its VLM (Very Low Mass) capsule technology provides superior transient response and more accurately captures every detail of your music. Audix D2 Trio has included DVICE mounts that let you squeeze these microphones into tight places eliminating the need for bulky microphone stands.

ARCHITECT AND ENGINEER SPECIFICATIONS

The microphone shall be of the dynamic type operating on the moving coil principle and the capsule shall be VLM Type B. The polar pattern of the microphone shall be hypercardioid. The nominal output impedance shall be 280 ohms at 1 kHz.The microphone shall have a sensitivity of 1.2 mV / Pa at 1 kHz and shall handle a sound pressure level of ≥144 dB. The microphone body shall be machined of aluminum and the grill cap shall be steel wire mesh. The overall dimensions shall be 21.5 mm in diameter at the base, 39 mm in diameter at the widest point and 100 mm in length.

OPERATION AND MAINTENANCE

The Audix D2 is a low impedance microphone and should be plugged into a “mic level” input of your console, mixer, or recording device. Please note that your microphone does not require phantom power and will not be affected in any way by phantom power should it be running simultaneously while the microphone is in operation. Avoid plugging or unplugging the microphone from the PA system unless the channel is muted or the volume of the system turned down. Failure to do so may result in a loud “popping” noise which could seriously damage the speakers in the PA system provided when not in use. Moisture of any kind can adversely effect the sound and performance of your microphone.

Audix D2 Trio Product Features

• Professional dynamic instrument mic for live sound or studio
•  Full response with punchy mid-bass
• VLM Capsule
• Designed, assembled & tested in the USA
• 5 year warranty

Applications

• Rack toms, congas, floor toms
• Guitar and bass cabinets
• Saxophone, brass

Transducer Type: Dynamic
Frequency Response: 68 Hz - 18 kHz
Polar Pattern : Hypercardioid
Output Impedance : 280 ohms
Sensitivity : 1.2 mV / Pa @ 1k
Capsule Technology : VLM Type B
Off-Axis Rejection : >30 dB
Maximum SPL : ≥144 dB
Power Requirements : None
Connector : 3-pin XLRm
Polarity : Positive pressure on diaphragm
produces positive voltage on
pin 2 relative to pin 3 of output
XLR connector
Materials / Finish : Black Hard Coat
Weight:128 g / 4.5 oz
Length: 100 mm / 3.9 in