Audix AP41BPA, WIRELESS,R41,BODY PACK ONLY, 106 Pre-coordinated frequencies for quick, easy and reliable set up
Vendor: Audix
Available
Audix AP41BPA, WIRELESS,R41,BODY PACK ONLY, 106 Pre-coordinated frequencies for quick, easy and reliable set up
The Audix AP41BPA features a value packed diversity system featuring the versatile B60 bodypack transmitter. This Audix AP41BPA bodypack may be used with any lavalier, headworn or instrument microphone in Audix line, as well as guitar and bass.
In front mounting antennas of the Audix AP41BPA there is an optional accessories include single space rack mount kit with BNC cables, rack mount kit for mounting two systems in one rack space, active directional antennas and antenna distribution system for up to four systems (4 channels).
Audix AP41BPA Features
- Incorporate up to 16 systems to use 16 unique channels simultaneously
- Single-channel receiver supports one wireless microphone
- 32 MHz wide spectrum tuning
- 106 pre-coordinated frequencies
- High-contrast LCD shows RF and AF signal strength, group/channel/frequency, level/squelch, battery level, and more
- One-touch sync via infrared
- One-touch scan eliminates inefficient manual tuning
- Ground-lift switch helps eliminate ground loops or hum
- Metal strain relief for power cable
- Adjustable AF and RF level
- Selectable lock function prevents the transmitter from being accidentally muted or powered off
Audix B60 Performance Series Bodypack Transmitter (522 to 586 MHz)
- 64 MHz bandwidth from 522 to 586 MHz covers A and B frequency groups
- Mini-XLR 3-pin connector for compatibility with a variety of microphones or guitar cables
- Durable tour-worthy metal housing
- High-contrast LCD shows group, channel, frequency, mic/line level, and battery status
- Convenient top-panel soft mute button for quick on/off switching
- Two supplied AA batteries provide up to 14 hours of run time
- Selectable 10/30 mW RF power output
- Choose mic or line level
- Four selectable gain settings—0 dB, -6 dB, -12 dB, and -24 dB
- Lock function deactivates the power button, RF output control, and level adjustment
Audix R41 Kit-A Performance Series Single-Channel UHF Diversity Receiver (A: 522 To 554 MHz) Specs
Frequency Band | 522 to 554 MHz |
Bandwidth | 32 MHz |
# Of Simultaneous Systems | Up to 16 |
Switchable Frequencies | 106 pre-coordinated frequencies |
Wireless Range | Up to 300' / 91 m |
Antenna Connector | 2 x BNC (8 VDC, 150 mA) |
Outputs | 1 x XLR 3-pin balanced 1 x 1/4" TS unbalanced |
Audio Output Level | XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain |
Audio Level Control | -12 to +9 dB in 3 dB steps |
Frequency Response | 45 Hz to 18 kHz |
Compander | 2:1 |
Pilot Tone | 32 kHz |
Receiving System | Single tuner, antenna diversity |
Signal to Noise Ratio | 105 dB at 30 kHz deviation (A-weighted) |
Total Harmonic Distortion (THD) | ≤0.7% (33 kHz deviation at 1 kHz) |
Sensitivity | 5 dBµV (S/N 60 dB at 25 kHz deviation, A- weighted) |
Power Requirement | 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A |
Dimensions (W x D x H) | 8.1 x 8.1 x 1.7" / 205 x 206 x 44 mm |
Weight | 1.9 lb / 0.9 kg |
Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz) Specs
RF Power Output | 10/30 mW |
Bandwidth | 64 MHz |
Gain Adjustment | 0 dB, -6 dB, -12 dB, -24 dB |
Inputs | 1 x mini-XLR 3-pin |
Input Impedance | Mic: 10 kOhms Line: 1 MOhm |
Maximum SPL | Approximately 128 to 140 dB (depending on microphone) |
Battery Life | Approximately 14 hours |
Current Consumption | 110 mA typical |
Power Requirement | 2 x AA 1.5 V batteries |
Dimensions (W x L x D) | 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm |
Weight | 3 oz / 85 g without batteries |