Aviom Mix320-D Personal Mixing System with Dante™ Interface

Vendor: Aviom
Description Aviom Mix320-D Personal Mixing System with Dante™ Interface The Aviom Mix320-D is a Personal Mixing System and professionally designed for an special use with Dante™ enabled mixing networks and consoles. This system has your back and...
$4,699.00 $5,199.00
Title

Aviom Mix320-D Personal Mixing System with Dante™ Interface

The Aviom Mix320-D is a Personal Mixing System and professionally designed for an special use with Dante™ enabled mixing networks and consoles. This system has your back and includes everything you need for creating a personal mixing system for six performers.

The A320 Personal Mixers are getting their digital power and data over the same cable, so the user just need to do is connecting a Cat-5 cable and already ready to start using the system.

A complete monitoring system in a box, ready to use!
The Aviom Mix320-A Personal Mixing System is created and available in two versions. The standard version is perfect for users that already have in-ear monitors and/or headphones. If the user is new to personal mixing and need IEMs, then it is best to use the enhanced version of the kit with six MEE Audio M6 Pro in-ear monitors included. These single-driver IEMs include an assortment of ear tips, a 72-inch cable, and a case.

Features

  • (1)   D400-Dante A-Net Distributor
  • (6)   A320 Personal Mixers
  • (6)   MT-1a Mic Stand Mounts
  • (7)   Cat-5e cables
  • (6)   MEE Audio M6 Pro IEM (optional)

Product Details

The Aviom Mix320-D Personal Mixing System is making the adding of Aviom monitoring to a Dante-enabled audio network or mixing console so easy. You don't need, or it is not required, any analog input module or console card; the inputs get patched directly from your Dante network.

The Aviom Mix320-D system includes a D400-Dante A-Net Distributor that is allowing up to 32 channels to be patched from the Dante network to the personal mixing system inputs.  The D400-Dante is also used for supplying DC power and A-Net digital data to the mixers. The Aviom Mix320-D system is designed with six A320 Personal Mixer for the performers, plus six MT-1a Mic Stand Mounts designed for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need for connecting the products.

Intuitive Mixing

The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features a 32-channel mix engine with 16 mono or stereo mix channels buttons and easy to use Stereo Placement controls.

Connect headphones, ear buds, or a wireless in-ear monitoring system to the Personal Mixer and you're ready to start mixing.

Distribute Power and Audio Over Cat-5

For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400-Dante A-Net Distributor.

The D400-Dante also serves as the system's input device; it allows up to 32 channels from your Dante network to be assigned to the eight powered A-Net ports on its front panel. Stereo Link switches allow adjacent channels to be treated as a stereo pairs on the A320 Personal Mixers where they will appear on a single mix channel button.

System Options

The Mix320-D system uses a Dante network for its inputs. If you use a digital console, check out the Mix320-Y Personal Mixing System which includes a Y1 card for Yamaha® consoles for its inputs. Or, if you have an analog console or recording system, the Mix320-A Personal Mixing System is what you need. It includes the 16-channel, line-level AN-16/i Input Module as its front end.

The mixing system packages are also easy to expand when you're ready—just add more Personal Mixers and A-Net Distributors as needed.

A320 Specifications

Audio Output 1/4" TRS stereo, headphone or line level
Stereo Mix Output, Headphone/Line Tip: Audio Left;
Ring: Audio Right;
Sleeve: Ground
A-Net I/O 1 A-Net In, RJ45 connector;
Supports Pro16 and Pro16e
D/A Conversion 44.1/48kHz, 24-bit
Stereo Operation Stereo Link, per channel pair;
Set at the input module;
Variable pan per mono channel or pan/spread per stereo channel pair
Headphone Output 275 mW per side into 50 Ohms (both sides driven)
Output Impedance 5 Ohms
Freq. Response 3Hz-22kHz +0.2dB/-3dB at 50 Ohms
THD +N < 0.003%
Output Voltage for Personal Mixers 24VDC, 0.5 amp
Transmitted over the Cat-5e cable
Signal to Noise
(unweighted)
-106dB (measured with zero data into all channels)
Latency 0.880 msec (measured from analog input to analog output)
Pro16e A-Net Use Cat-5e (or better) cable;
Maximum 400 ft (122 m) between devices;
Supports Power Over A-Net
Cat-5 cable Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Power 24 VDC, 0.5 amp;
Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
Dimensions 10.26" (260.6 mm) wide x 6.14" (155.95 mm) deep x 1.91" (48.51 mm) high
Weight 1.3 lb. (0.59 kg)
Options MT-1a Mic Stand Mount
D400-Dante Specifications
Dante Interface 32 channels (44.1/48kHz Sample Rate)
Dante Primary I/O RJ45 connector
Dante Secondary I/O RJ45 connector
Dante LEDs Network Activity (green);
1GB Network Connection Active (yellow)
A-Net Out to Personal Mixers Eight RJ45 connectors, powered
A-Net Out Pro16e A-Net;
RJ45 connector, unpowered
LEDs Power On (red); Network Sync (green)
Stereo Link Two 8-position DIP switch blocks (1-16, 17-32)
Output Voltage for Personal Mixers 24VDC, 0.5 amp
Transmitted over the Cat-5e cable
A-Net Cables Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Unshielded Cat-5e cable may be used on all rear panel connections
Power Supply Internal, IEC connector
Input Voltage 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
AC Fuse Types 115V range: T2.5AL/250V
230V range: T1.25AL/250V
Dimensions 19" (482.6 mm) wide x 7.386" (187.6 mm) deep; 2U, 3.5" (88.9 mm) high
Weight 12.0 lbs (5.44 kg)