Coles 4104B Noise Canceling Commentator’s Ribbon Microphone
Vendor: Coles
Available
Coles 4104B Noise Canceling Commentator’s Ribbon Microphone
The Coles 4104B Lip Microphone is a professionally designed ribbon microphone created for use in commentary and speech capturing in noisy environments. A sensitive ribbon transducer is made combined along with a directional polar pattern and flat, low-cut frequency response at 16 Hz. The result is made accurate signal reproduction having without noise caused by ambiance or proximity effect.
In order for maximizing the noise and achieving the best frequency response, the Lip Microphone comes requiring the user to position the microphone close to the mouth. A positioning bar is created for making the contact along with the user's lip and is creating the correct talking distance between the user and microphone. Stainless steel breath shields protect the capsule against moisture and noise due to sibilance and plosive sounds. A removable, plastic hygiene shield is made available and possible to be cleaned intended for reuse or thrown away.
Noise-Free in Ambient Environments
The Coles 4104B Lip Microphone is professionally designed intended for commentary applications in noisy, ambient environments. Directional polar and linear frequency response that comes along with low-cut roll-off result in accurate reproduction that comes with minimal noise.
Positioning Bar
A ribbon transducer comes featured in the capsule and is requiring the close positioning to the mouth for best results. A positioning bar is making contact along with the user's lip and is capable of maintaining the necessary talking distance.
Low Frequency Roll-Off
The Lip Microphone comes featuring a flat frequency response that comes along with a low-cut roll-off at 16 Hz. This is eliminating the low frequency ambient noise and noise due to proximity effect.
Transducer | Ribbon microphone |
Polar Pattern | Cardioid |
Frequency Response | 60 Hz to 12 kHz |
Dynamic Range (Typical) | Not specified by manufacturer |
Signal-to-Noise Ratio | Distortion less than 1% at an SPL of 120 dB |
Maximum Input Sound Level | Not specified by manufacturer |
Power Requirements | Ribbon transducer—no external power required |
Output Impedance | 300 Ohms |
Output Connectors | 3-pin XLR male |
Pad | No |
Low Frequency Roll-Off | Low frequency roll-off at 16 Hz |
Dimensions (L x W x D) | 7.9 x 2.2 x 3.0" (20.1 x 5.6 x 7.6 mm) |
Weight | 10 oz (283 g) |