← Previous Product Next Product →

Shure MX393/C Cardioid - Condenser Boundary Microphone

Shure MX393/C/O/S - Condenser Boundary Microphone, Built-in Preamp, 12' 3-pin Mini Connector (TA3F) to XLR Cable, Programmable Switch and LED Indicator

Name: Shure MX393/C/O/S - Condenser Boundary Microphone, Built-in Preamp, 12' 3-pin Mini Connector (TA3F) to XLR Cable, Programmable Switch and LED Indicator
Brand: Shure
SKU: MX393/C
Price: 287.00 USD
Availability: InStock

Vendor: Shure

Shure MX393/C/O/S - Condenser Boundary Microphone, Built-in Preamp, 12' 3-pin Mini Connector (TA3F) to XLR Cable, Programmable Switch and LED Indicator Shure’s MX393 is a surface-mounted and electret condenser microphone. MX393 is designed by...

$287.00 $402.00

Cardioid

Omnidirectional

Supercardioid

Subtotal:

Quantity

Description

Shure MX393/C/O/S - Condenser Boundary Microphone, Built-in Preamp, 12' 3-pin Mini Connector (TA3F) to XLR Cable, Programmable Switch and LED Indicator

Shure’s MX393 is a surface-mounted and electret condenser microphone. MX393 is designed by Shure to get mounted on conference tables, stage floors, and lecterns. It is high sensitivity and having a huge frequency range which is making it especially suitable to pick up speech and vocals in sound reinforcement and recording applications. MX393 has Interchangeable cartridges to provide the installer with greater flexibility and making it possible to easily reconfigure microphone coverage as the need arises. A removable microphone cable and an internal preamplifier are included also included in this MX393 electret condenser.

MX393 series microphones take advantage of the principle that, at a barrier or boundary, the sound pressure level doubles. When placed near a sufficiently large boundary surface, the microphone has 6 dB higher sensitivity and approximately 3 dB greater direct-to-reverberant sound ratio.

Flat frequency response across the vocal range for uncolored sound
Interchangeable cartridges that provide a choice of polar pattern for each application
Sleek, low-profile design for surface mounting
Balanced, transformerless output for increased immunity to noise
Programmable mute button
LED indicator
Logic input/output for remote control or use with automatic mixers
RF filtering

Specification

Microphone

Form Factor	Boundary/Surface Mount
Sound Field	Mono
Capsule	Electret Condenser
Polar Pattern	Cardioid
High-Pass Filter	None
Indicators	1 x Red/Green Single LED (Status)
On-Board Controls	Mic Mute, Push-to-Talk, On/Off

Performance

Frequency Range	50 Hz to 17 kHz
Maximum SPL	117 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Off-Axis Rejection	45 dB
Impedance	180 Ohms
Sensitivity	-27.5 dBV/Pa at 1 kHz (Open Circuit Voltage, 1 kHz)
Dynamic Range	94 dB
Signal-to-Noise Ratio	71 dB (at 1 Pa/94 dB SPL)
Equivalent Noise Level	23 dB A-Weighted
THD	1%

Connectivity

Output Connectors (Analog)	1 x XLR 3-Pin Male (on Attached Cable)
Cable Length	12' / 3.66 m

Power

Operating Voltage	11 to 52 V
Operating Current Consumption	2 mA

Physical

Color	Black
Mounting	Surface-Mount
Operating Temperature	0 to 135°F / -17.78 to 57.22°C
Operating Humidity	0 to 95%
Storage Temperature	-20 to 165°F / -28 to 74°C
Dimensions	W: 3 x L: 4.26" / W: 76.2 x L: 108.3 mm
Weight	0.38 lb / 172 g