← Previous Product Next Product →

Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC

Name: Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC
Brand: Symetrix
SKU: EDGE (non-Dante)
Price: 3384.00 USD
Availability: InStock

Vendor: Symetrix

Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC The Edge Digital Signal Processor is built for maximum flexibility, featuring four card slots and a broad selection of user-installable cards, making it...

$3,384.00

Default Title

Subtotal:

Quantity

Description

Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC

The Edge Digital Signal Processor is built for maximum flexibility, featuring four card slots and a broad selection of user-installable cards, making it the ideal choice when a precise combination of features is required and no other solution will do.

Features

A Powerful DSP Featuring Flexible I/O Configuration
4 I/O Expansion Card Slots
Optional 128 Channel (64×64) Redundant Dante
On-board Ethernet and Dante Network Switches

Specifications

Specification	Detail
Processor	1 x Analog Devices SHARC 21489 @ 400 MHz SIMD
Raw Processing Capacity	400 MIPS, 1.6 GFLOPS
Sampling Rate	48 kHz, ± 100 ppm
Frequency Response (A/D/A)	20 Hz – 20 kHz, ± 0.5 dB
Dynamic Range (A/D/A)	114 dB, A-weighted
Channel Separation (A/D/A)	108 dB @ 1 kHz, +24 dBu
Latency (A/D/A)	0.88 mS, inputs routed to outputs
Delay Memory	174 mono seconds per Edge frame
Analog Control Inputs	0-3.3 VDC
Recommended External Control Potentiometer	10k Ohm, linear
Logic Outputs	Low (0 V) when active, pulled high (5 V) when inactive
Logic Output Maximum External Power Supply Voltage	24 VDC
Logic Output Maximum External Power Supply / Current Sinking	50 mA
Logic Output Maximum Output Current	10 mA
RS-232 Accessory Serial I/O	38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight through, only pins 2, 3, and 5 required
RS-485 Serial I/O	38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
Ethernet Cable	Standard CAT5/6, maximum device to device length = 100 m
Dante Cable	Standard CAT5/6, maximum device to device length = 100 m
ARC Cable	Standard CAT5/6, distance dependent upon load and number of devices
Maximum Devices per System	32 units per Site File
Maximum Stored Presets	1,000

Mechanical Specifications

Specification	Detail
Space Required	1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3-inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical	100-240 VAC, 50/60 Hz, 45 Watts maximum universal input and/or suitable 24 VDC / 2.0 Amp auxiliary power source. No line voltage switching required.
Ventilation	Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight	13 lbs (5.9 kg)
Certifications and Compliance	UL 62368-1, cUL 62368-1, IEC 62368-1, EN 55103-1, EN 55032, EN 55103-2, FCC Part 15; UKCA; EAC; RoHS.