Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC

Vendor: Symetrix
Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC The Edge Digital Signal Processor is built for maximum flexibility, featuring four card slots and a broad selection of user-installable cards, making it...
$3,384.00
Title

Symetrix EDGE (non-Dante) Programmable DSP, 4 I/O card slots, ARC

The Edge Digital Signal Processor is built for maximum flexibility, featuring four card slots and a broad selection of user-installable cards, making it the ideal choice when a precise combination of features is required and no other solution will do.

Features

  • A Powerful DSP Featuring Flexible I/O Configuration
  • 4 I/O Expansion Card Slots
  • Optional 128 Channel (64×64) Redundant Dante
  • On-board Ethernet and Dante Network Switches
Specification Detail
Processor 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD
Raw Processing Capacity 400 MIPS, 1.6 GFLOPS
Sampling Rate 48 kHz, ± 100 ppm
Frequency Response (A/D/A) 20 Hz – 20 kHz, ± 0.5 dB
Dynamic Range (A/D/A) 114 dB, A-weighted
Channel Separation (A/D/A) 108 dB @ 1 kHz, +24 dBu
Latency (A/D/A) 0.88 mS, inputs routed to outputs
Delay Memory 174 mono seconds per Edge frame
Analog Control Inputs 0-3.3 VDC
Recommended External Control Potentiometer 10k Ohm, linear
Logic Outputs Low (0 V) when active, pulled high (5 V) when inactive
Logic Output Maximum External Power Supply Voltage 24 VDC
Logic Output Maximum External Power Supply / Current Sinking 50 mA
Logic Output Maximum Output Current 10 mA
RS-232 Accessory Serial I/O 38.4 kbaud (default), 8 data bits, 1 stop bit, no parity, no flow control wired straight through, only pins 2, 3, and 5 required
RS-485 Serial I/O 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port
Ethernet Cable Standard CAT5/6, maximum device to device length = 100 m
Dante Cable Standard CAT5/6, maximum device to device length = 100 m
ARC Cable Standard CAT5/6, distance dependent upon load and number of devices
Maximum Devices per System 32 units per Site File
Maximum Stored Presets 1,000

Mechanical Specifications

Specification Detail
Space Required 1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3-inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
Electrical 100-240 VAC, 50/60 Hz, 45 Watts maximum universal input and/or suitable 24 VDC / 2.0 Amp auxiliary power source. No line voltage switching required.
Ventilation Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Shipping Weight 13 lbs (5.9 kg)
Certifications and Compliance UL 62368-1, cUL 62368-1, IEC 62368-1, EN 55103-1, EN 55032, EN 55103-2, FCC Part 15; UKCA; EAC; RoHS.