Community D6 6.5-Inch Ceiling Speaker

Community D6-W (White) / D6-B (Black) 6.5-Inch Ceiling Speaker

The Community D6-B for Black and D6-W for White, comes with a more focused dispersion, higher sensitivity, output and greater LF extension than the smaller models. The high performance D6 is a professionally designed true coaxial loudspeaker that comes along with a real compression driver concentrically arranged so that the upper frequencies are emerging through the center of the low-frequency driver’s magnetic structure and cone with the use of a precisely tapered Tru-Phase™ high-frequency waveguide. This special construction comes providing an consistent, wide dispersion up to 16 kHz, all but also eliminate the high-frequency narrowing. Further pattern improvement is also made achieved by precisely mounting the low frequency driver (and its concentric HF driver) centered in the baffle, as contrasted to the offset designs used by others.

The D SERIES are offering a powerful magnetic structures and efficient coils for ensuring a high output, which comes resulting in more headroom per power amplifier. Each D SERIES ceiling model includes everything needed for use in standard installations, and comes along with a built-in autoformer allowing it to be used in 8-ohm or 70V/100V applications. The D SERIES ceiling loudspeakers are ETL listed and all models have been tested by ETL to comply with UL1480, UL2043 and CSA60065.

Features

• True coaxial loudspeaker with HF compression driver
• Patented Carbon Ring Cone Technology™
• Simple spring loaded Drop-Stop™ installation
• Selectable 8 Ohm or 70V/100V operation with taps
• Typically requires half the usual power due to the true Coaxial design

• Transducers: LF - 1 x 6.5”, HF - 1 x 1” exit compression driver
• Operating Range: 65 Hz – 22 kHz
• Sensitivity (1W/1m): 94 dB
• Power Handling: 100W continuous @ 8 ohms
• Continuous Max Output: 114 dB (120 dB Peak)
• 70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)
• Nominal Beamwidth (H x V): 125° Conical
• Finish: Corrosion-resistant zinc plated steel can, black or white paintable ABS baffle, matched dual-layer powder-coated steel grille
• Dimensions (H x Dia): 6.8" x 11.2" (173 x 286 mm)