Community DP6-B (Black) / DP6-W (White) 6.5-Inch Pendant Loudspeaker System

Vendor: Community
Community DP6-B (Black) / DP6-W (White) 6.5-Inch Pendant Loudspeaker System The Community DP6-B for Black and Community DP6-W for White, is a professionally designed high performance 6.5-inch pendant loudspeaker that's created for open architecture spaces or...
$402.00
Color
Black
White

Community DP6-B (Black) / DP6-W (White) 6.5-Inch Pendant Loudspeaker System

The Community DP6-B for Black and Community DP6-W for White, is a professionally designed high performance 6.5-inch pendant loudspeaker that's created for open architecture spaces or any location where a stylish pendant form factor is truly needed. It comes featuring high power handling, high sensitivity and realistic sound reproduction, D SERIES pendant loudspeakers is possible to be used in a wide variety of speech and music applications. They are equipped along with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP6 is made capable to be combined along with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design comes using the separate magnets for the LF and HF drivers for having reduced distortion and industry-leading sensitivity, thereby also permits 3 dB to 6 dB greater output level while it requires half the amplification power of competing products at the same time. An easy-access selector switch is conveniently located on the face of the loudspeaker intended for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for use in an aesthetically pleasing installation.

Features

  • Stylish, contoured contemporary pendant design
  • Same components and voicing as the Distributed Design ceiling and surface mount loudspeaker family
  • Consistent, wide dispersion up to 16 kHz
  • True coaxial loudspeakers with HF compression drivers
  • Tru-Phase™ high-frequency waveguide
  • Patented Carbon Ring Cone Technology™
  • High efficiency, high output, high intelligibility, low distortion
  • Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
  • Easy-access power tap switch for selectable 8 ohm or 70V/100V operation
  • Integrated rear cover hiding all wires and hanging hardware
  • Weather-resistant constructed with treated drivers and two-layer powder-coated grilles
  • ETL listed to comply with UL1480
  • Five-year manufacturer warranty
  • Transducers: LF -1 x 6.5”, HF - 1 x 1” exit compression driver
  • Operating Range: 65 Hz – 22 kHz
  • Sensitivity (1W/1m): 94 dB
  • Power Handling: 100W continuous @ 8 ohms
  • Continuous Max Output: 114 dB (120 dB Peak)
  • 70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)
  • Nominal Beamwidth (H x V): 125° Conical
  • Finish: Black or white paintable ABS matte plastic, dual-layer powder-coated steel grille
  • Dimensions (H x Dia): 14.7" x 11.2" (374 x 285 mm)