DPA 4188-DL-I-B00-LH-2 d:fine™ 4188 Directional Flex InEar Headset Mic, 120 mm Boom, Black, MicroDot, Dual In-Ear Headset Over-ear Microphone for Live Production and Churches
Vendor: DPA
Available
DPA 4188-DL-I-B00-LH-2 d:fine™ 4188 Directional Flex InEar Headset Mic, 120 mm Boom, Black, MicroDot, Dual In-Ear Headset Over-ear Microphone for Live Production and Churches
The DPA 4188-DL-I-B00-LH-2 is a black d:fine In-Ear Broadcast Headset Microphone from DPA that is professionally created as a dual in-ear, dual-ear mount, communication and broadcast headset microphone, which is designed lightweight and is allowing for one-ear monitoring. The DPA 4188-DL-I-B00-LH-2 is able to be use audio in several environments for applications such as producers, broadcast TV, sports announcers, radio hosts, singers, theater actors, and more.
The In-Ear Broadcast Headset Microphone comes featuring an in-ear drivers that are allowing no audio leakage to the microphone capsule. The cable steer, located at them headset mount, controls the cable run down the neck, so the user is given the ability to adjust the headset mount size and choose between right and left ear orientation.
DPA's spring steel construction is integrating the cable within the earhook of hte headset so that it can be mounted quickly and comfortably for fitting any ear size. Created with low noise and high sensitivity, this headset mic is capable to deliver a natural sound. In addition, the in-ear monitors also capable to deliver a clear communication. The In-Ear Broadcast Headset Microphone has a 1/8" mini-jack connector for the in-ear driver.
- MicroDot connector
- Mic and in-ear monitor integrated in one solution
- Easy to mount with minimum cable clutter
- The microphone cable can be changed independently of the headset mount
Directional Characteristic | Directional |
Principle of Operation | Pressure gradient |
Cartridge Type | Pre-polarized condenser |
Frequency Range | 20 Hz - 20 kHz Frequency Range ± 2 dB: (Near field) 0.8 to 1.2" (2-3 cm) 100 Hz to 20 kHz with 4-6 dB soft boost at 15 kHz |
Sensitivity | Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa |
Equivalent Noise Level | A-Weighted: Typ. 28 dB (A) re. 20 µPa (max. 30 dB (A)) ITU-R BS.468-4: Typ. 40 dB (max. 42 dB) |
Signal to Noise Ratio | A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A) |
Total Harmonic Distortion (THD) | <1% up to 123 dB SPL peak; <1% up to 120 dB SPL RMS sine |
Dynamic Range | Typ. 95 dB |
Maximum SPL | Peak Before Clipping: 144 dB |
Output Impedance | From MicroDot: 30 - 40 ohms. From DAD6001-BC: 100 ohms |
Cable Drive Capability | Up to 984' (300 m) with DAD6001-BC XLR adapter |
Output Balance Principle | Signal balanced with DAD6001-BC XLR adapter |
Common Mode Rejection Ratio | >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
Current Consumption | Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter |
Connector | MicroDot connector |
Boom Length | Microphone: Standard: 4.7" (120 mm) |
Polarity | +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter) |
Electro Magnetic Compatibility | Fully compatible |
Temperature Range | -40 to 113°F (40 to 45°C) |
Relative Humidity | Up to 90% |
Cable Diameter | Microphone Cable: 0.06" (1.6 mm) In-Ear Cable: 0.08" (1.95 mm) |
Cable Length | 4.3' (1.3 m) |
Weight | 0.92 oz (26 g) |
Type | Dynamic earplug (acknowledged Hi-Fi plugs) |
Connector | 1/8" (3.5 mm) stereo mini-jack |
In-Ear Type | Single: Signal at mini-jack tip Dual: Signal at mini-jack tip (left) and ring (right) |
Sensitivity | 107 dBV |
Impedance | Nominal: 18 ohms |