DPA 4188-DL-I-F00-LH-2 d:fine™ 4188 Directional Flex InEar Headset Mic, 120 mm Boom, Beige, MicroDot, Dual In-Ear Headset Over-ear Microphone for Live Production and Churches

Vendor: DPA
Description DPA 4188-DL-I-F00-LH-2 d:fine™ 4188 Directional Flex InEar Headset Mic, 120 mm Boom, Beige, MicroDot, Dual In-Ear Headset Over-ear Microphone for Live Production and Churches The DPA 4188-DL-I-F00-LH-2 is a d:fine In-Ear Broadcast Headset Microphone...
$919.95
Title

DPA 4188-DL-I-F00-LH-2 d:fine™ 4188 Directional Flex InEar Headset Mic, 120 mm Boom, Beige, MicroDot, Dual In-Ear Headset Over-ear Microphone for Live Production and Churches

The DPA 4188-DL-I-F00-LH-2 is a d:fine In-Ear Broadcast Headset Microphone from DPA that is professionally created as a dual in-ear, dual-ear mount, communication and broadcast headset microphone, which is designed lightweight and is allowing for one-ear monitoring. The DPA 4188-DL-I-F00-LH-2 is able to be use audio in several environments for applications such as producers, broadcast TV, sports announcers, radio hosts, singers, theater actors, and more.

The In-Ear Broadcast Headset Microphone comes featuring an in-ear drivers that are allowing no audio leakage to the microphone capsule. The cable steer, located at them headset mount, controls the cable run down the neck, so the user is given the ability to adjust the headset mount size and choose between right and left ear orientation.

DPA's spring steel construction is integrating the cable within the earhook of hte headset so that it can be mounted quickly and comfortably for fitting any ear size. Created with low noise and high sensitivity, this headset mic is capable to deliver a natural sound. In addition, the in-ear monitors also capable to deliver a clear communication. The In-Ear Broadcast Headset Microphone has a 1/8" mini-jack connector for the in-ear driver.

  • MicroDot connector
  • Mic and in-ear monitor integrated in one solution
  • Easy to mount with minimum cable clutter
  • The microphone cable can be changed independently of the headset mount
Directional Characteristic Directional
Principle of Operation Pressure gradient
Cartridge Type Pre-polarized condenser
Frequency Range 20 Hz - 20 kHz
Frequency Range ± 2 dB: 0.8 to 1.2" (2-3 cm)
100 Hz to 20 kHz with 3 dB soft boost at 8 to 20 kHz
Sensitivity Nominal, ± 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent Noise Level A-Weighted: Typ. 28 dB (A) re. 20 µPa (max. 30 dB (A))
ITU-R BS.468-4: Typ. 40 dB (max. 42 dB)
Signal to Noise Ratio A-Weighted, re. 1 kHz at 1 Pa (94 dB SPL): Typ. 66 dB (A)
Total Harmonic Distortion (THD) <1% up to 123 dB SPL peak; <1% up to 120 dB SPL RMS sine
Dynamic Range Typ. 95 dB
Maximum SPL 144 dB
Output Impedance From MicroDot: 30 - 40 ohms
From DAD6001-BC: 100 ohms
Cable Drive Capability Up to 984' (300 m) with DAD6001-BC XLR adapter
Output Balance Principle Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio >60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Current Consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
Connector MicroDot connector
Boom Length Microphone: Standard: 4.7" (120 mm)
Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electro Magnetic Compatibility Fully compatible
Temperature Range -40 to 113°F (40 to 45°C)
Relative Humidity Up to 90%
Cable Diameter Microphone Cable: 0.06" (1.6 mm)
In-Ear Cable: 0.08" (1.95 mm)
Cable Length 4.3' (1.3 m)
Weight 0.92 oz (26 g)
In-Ear Broadcast Headset
Type Dynamic earplug (acknowledged Hi-Fi plugs)
Connector 1/8" (3.5 mm) stereo mini-jack
In-Ear Type Single: Signal at mini-jack tip
Dual: Signal at mini-jack tip (left) and ring (right)
Sensitivity 107 dBV
Impedance Nominal: 18 ohms