Clear-Com HXII-BP-X4, HelixNet digital 2 Ch. dual listen monaural beltpack

Clear-Com HXII-BP-X4, HelixNet digital 2 Ch. dual listen monaural beltpack

Clear-Com HXII-BP-X4 features a Single Cable Operation, All networked intercom channels and power for beltpacks or a combination of user devices can be transmitted over a single shielded twisted-pair cable (mic cable for powerline, CAT5/6 for Power-over-Ethernet). Clear-Com HXII-BP-X4 also has Multiple channels can be assigned to a single key, allowing one key to address many channels with a single push of a button. HXII-BP-X4 also features carry power and audio over Power-over-Ethernet (PoE) or a single twisted-pair XLR cable to deliver up to 2 of any 24 available channels and program feed audio to the beltpack. Another thing in Clear-Com HXII-BP-X4 is a a USB light is connected to the beltpack via the USB Micro-AB port, the beltpack can be configured to blink the light or keep the light on for assigned channels.

HelixNet digital two-channel dual listen monaural beltpack with a high-contrast OLED display and four-pin male headset connector. It has a three-pin female XLR for Digital PL and an RJ-45 EtherCON PoE intercom line connector.

Clear-Com HXII-BP-X4 Product Features

• 2-Channel Full-duplex Digital Beltpack
• Access to any 2 channels from up to 24 available channels of audio
• Binaural listening on HXII-BP-X5 beltpacks
• Assign to a pre-defined role to make sure multiple devices are configured identically
• Power and audio over a Power-over-Ethernet (PoE) or single XLR cable
• Program audio with separate program level control
• Stacked key assigns multiple channels to a single key
• 10-character yellow OLED label display
• USB flasher mode
• USB Micro-AB port
• Pushbutton menu access
• Recessed level rotary knob controls
• XLR-4M or XLR-5F headset jack
• Rugged, light-weight poly-carbonate casing
• IP-53 environmental rating for weather-proofing

Channels
Two intercom channels (Selectable) Program Audio (Assignable from Main Station)

Connectors
Intercom Line: 3-pin XLR–F

LAN/PoE: RJ-45 etherCON

Headset: 4-pin XLR–or 5-pin XLR-F

USB: Micro AB

Microphone Pre-Amplifier
Headset Mic Impedance: 200Ω (Dynamic)

Headset Mic Voltage: 1.7V (Electret selectable)

Limiter: +23dB

The following specified for a route to four-wire output at 0dBu out

Mic Gain: 60dB (Dynamic), 45dB (Electret)

Frequency Response: 300Hz – 10 kHz ±3dB, contoured for Intelligibility

Distortion: <0.2% THD @ 1kHz

Noise: <-55dBu (Dynamic) <-65dBu (Electret)

Headphone Amplifier
Load Impedance: >32Ω

Output Level: +12dBu before clipping

Sidetone: -12dBu (selectable)

The following specified for a route from a four-wire input at 0dBu in

Max Gain: 0dB

Frequency Response: 40Hz – 10kHz ±3dB

Distortion: <0.2% THD @ 1kHz

Noise: -65dBu

Headphone Limiter: 0dBu (selectable)

Power Requirements
4W DC Voltage Range: 30-60 volts 4W

Power-over-Ethernet (PoE)

Environmental
32°F to +104°F (0°C to +40°C)

0 – 90% relative humidity

Dimensions
5.3 x 3.9 x 1.7 in (HxWxD)

(135 x 99 x 43 mm)

Weight
12.2 oz (0.35 kg)