Clear-Com LQ-R4WG8, 8 Ch, 4-Wire with GPIO IP interface

Clear-Com LQ-R4WG8, 8 Ch, 4-Wire with GPIO IP interface

Clear-Com LQ-R4WG8 has a Linking 4-wire with GPIO audio, this LQ-R4WG8 features and designed for general purpose of the Clear-Com LQ interfaces is to connect and route signals from multiple intercom systems and audio devices from point-to-point or point-to-multi-point, virtually anywhere over the secure IP network. The Clear-Com LQ-4WG2 can interconnect with devices, such as analog ports of any matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles.

Multi-interface unit facilitating IP communications for extension of up to 8 ports of 4-wire, SIP and IVC-32-HX connectivity simultaneously over any IP network (LAN, WAN & Internet).   for up to Five other LQ units in a Link-Group. Bridging support for both Clear-Com Eclipse and Drake 4000 panel data. Comes with D- Type 9 pin General Purpose input and relay output IP communications interface for extending 4-Wire audio communications and Input / Output signaling to remote sites over IP networks (LAN, WAN, Internet). Can link over IP into Eclipse frames via E-IPA-XX or IVC-32-HX and HelixNet via a HLI-ET2 module, Licensable hosting of up to 8 Agent-IC clients and 8 lines of IP telephony (SIP) per unit. Two inline PSU bricks included with purchase.

Clear-Com LQ-R4WG8 Product Features

• 8-port 1RU Panel with 8 ports forLinking 4-wire with GPIO Audio
• Intercom-over-IP: routing intercom and audio signals over IP networks
• Connect up to 6 LQ devices together over LAN, WAN, Internet
• Remotely connect up to 8 IVC-32-HX or E-IPA-HX ports per device
• Connects with matrix intercom systems, analog telephone circuits, two-way radio gateways and audio consoles
• Supports up to 8 Agent-IC clients per LQ device (license required)
• Supports up to 8 SIP client connections per LQ device (license required)
• Connects to HelixNet via HLI-ET2 over LAN or WAN
• Add up to 24 ports of audio I/O per HelixNet Main Station by connecting to LQ Series
• 4-wire ports support data and audio for Clear-Com Eclipse and Drake 4000 panels
• Adjustable bandwidth on a per port basis
• Connectors: Network/LAN: EtherCON/RJ45 (female); 4-wire with GPIO Audio I/O: 9-way D-type (male)
• Network-friendly OPUS Codec
• Browser-based Core Configuration Manager application
• Networked Control Events for multi-unicast one-to-many routing

Audio
Resolution: 12, 24 bit
Sample Rate: 24, 48 KHz
Frequency Response: 100 – 12 KHz or 100 – 20 KHz
CODEC: OPUS

Line Level: (0 dB)
Input Gain: -12dB to +12dB
Output Gain: -12dB to +12dB
Mic Level: (-50 dB)
Input Gain: -12dB to +12dB
Output Gain: -12dB to +12dB

Network Setting
Bit Rates: 16, 32, 48, 64, 128Kbps
Packet Size: 5, 10, 20, 40, 60ms
Jitter Buffers: 0 – 1000ms

Connectors
Network/LAN: EtherCON/RJ45 (female)
4-wire with GPIO Audio I/O: 9-way D-type (male)

Partyline Output Current
Type: Clear-Com & RTS TW
Local DC Powered: 250mA per pair of partyline ports (500mA total)

Power Supply
In-line supply with sleeve locking connector
Input: 100-240V, 50-60Hz, 1.4A MAX
Output: DC 12V, 5A, 60W MAX

Environmental
Operating Temperature: +32°F – +104°F (0°C – +40°C)
Storage Temperature: -67°F – +158°F (-55°C – +70°C)
Humidity: 90%, non-condensing

Dimensions
19 x 1.79 x 8.8 in (WxHxD)
(483 x 46 x 224 mm)

Weight
4.29lbs (1.95kg)