Pro Intercom BLAZON3 Top-mounted round strobe with front panel switchable annunciator Signal Light & Audible Alert

Pro Intercom BLAZON3 Top-mounted round strobe with front panel switchable annunciator Signal Light & Audible Alert

Strobe Light and Switchable Sonic Alert

The Pro Intercom BLAZON3 is designed for providing the combination of a xenon lamp with an audible annunciator. Anytime that any signal lamp button on any station in the same circuit is pressed, the Pro Intercom BLAZON3 will be activated. The xenon lamp is connected to the system permanently. The audible may be switched between pulsed, off, and constant.

Performance: Pro Intercom Blazon/3 is able to be triggered using the same voltage which is also lighting the normal signal lamps in the intercom system. Circuitry is provided for sustaining the Pro Intercom Blazon3 for 4 seconds after being triggered. The xenon lamp has a flash rate of 2Hz, provides 8 flashes per cycle.

The Pro Intercom Blazon3 is connected to the headset intercom system in the same manner as a belt pack. It is equipped with two 3-pin XLR connectors on the rear panel. By convention (to differentiate from microphone inputs) the female connector is designated as input. The male connector is provided for looping onwards to the next station in the system. Reversing these connections will not affect operation.

Pro Intercom Blazon3 is powered by the intercom power supply and requires no batteries or other external power source. In its ready mode it draws only 21.1mA; with the strobe active, 56mA, and; with the strobe and audible annunciator, only 108mA. When calculating power supply requirements, you may consider the Blazon/3 as the approximate equivalent of 3 or 4 belt packs.