Pro Intercom BP15 Single circuit, miniature Miniature Beltpack

Pro Intercom BP15 Single Circuit, miniature Miniature Beltpack.

The Pro Intercom BP15 beltpack is designed for those who wanted for a smaller, light beltpack. The BP1 is bullet-proof, is also equipped with impact resistant front and back bezels, aluminum extrusion, and recessed controls. For minimizing the size the headset and the loop-through XLRs on the back is using a smaller circuit connector. We are offering an optional accessory cable for converting from the smaller connector back to XLR, and an optional Y-cable for allowing the looping onward to the next station in the circuit. For a much nicer and neater less cumbersome solution we suggest to use the SB1 Splitter Box. The actual circuit of the Pro Intercom BP.15 very similar to the BP1, so it sounds the same. The size of the BP.15 is approximately that of a deck of playing cards.

• The microphone input circuit includes a limiter which keeps the microphone input from being over loaded, causing distortion
• The amplifier circuit delivers a crisp, clear signal to the earspeakers for excellent speech recognition
• Wide enough frequency response to minimize the possibility of ear fatigue during a long performance
• Comes with a cable constructed from a length of steel reinforced cable with the miniature plug on one end and a 3¡©pin female XLR on the other

• Power requirement:
  18~30VDC, 10mA quiescent
  30 mA max, with both lamps lit.
• Headphone output: 8~4K ohm acceptable, 200 ohm ideal
• Microphone:
  Dynamic 200~600 ohm
  Electret: 1.0~1.8k ohm
• Audio bridging impedance: 200 ohm unbalanced
• Size:
  Case only: 3.4 x 2.1 x 0.9 in (8.6 x 5.3 x 2.3 cm)
  Overall: 3.8 x 2.3 x 1.4 in (9.7 x 5.5 x 3.3 cm)
• Weight: 4.8oz 136g