Telex RTS SS-2002 S Box with Handle 2CH portable speaker station

Vendor: Telex RTS
Telex RTS SS-2002 S Box with Handle 2CH portable speaker station The S-box offers a compact design with a convenient carrying handle for portable applications. Loop-through connectors on the side allow for easy...
$841.00
Title

Telex RTS SS-2002 S Box with Handle 2CH portable speaker station

The S-box offers a compact design with a convenient carrying handle for portable applications. Loop-through connectors on the side allow for easy intercom cabling. In dual-channel configuration, XLRs are 6-pin. Inside the S-box loop-through XLRs are connected to the speaker station terminal block via pre-tinned leads.

Features

  • 2-channel intercom speaker station with portable S-box enclosure and full send-receive capability
  • 4-watt speaker
  • Simplified 3-pin XLR loop-thru connectors for quick connection to intercom system
  • Internal DIP setup switch control and full sidetone adjustment trim
  • Backlit Channel Select switch
  • Backlit front panel control switches for Talk, Call, Listen, Speaker and Panel Mic
  • Talk key with push-to-talk and hands-free latching operation modes
  • Panel Mic Key switches between built-in electret and optional gooseneck
  • 24VDC phantom power
Frequency Response Send and Receive:
20 Hz - 20 kHz +/-800Hz, 100mVrms
Mic Kill/Detect:
24 kHz +/-800Hz, 100mVrms
Gain 35dB
Microphone Input Type 1 x XLR-4M (Headset Mic)
1 x 1/4" TRS Phone (Gooseneck Panel Mic)
Limiter No
Power Output Unbalanced Mode: 1 Vrms, +/-10%
Balanced Mode: 1 Vrms
Speaker 8 Ohms
SPL Not Specified by Manufacturer
Signal-to-Noise Ratio Not Specified by Manufacturer
THD + N Not Specified by Manufacturer
Panel Microphone Preamp Yes
Program Amplifier Yes
Speaker Amplifier 4 Watts
Input Level -40dB - +35dB
Input Impedance Headset Headphones: 150 - 600 Ohms
Headset Microphone: 50 - 200 Ohms
Panel Mic(Built-In): 2.2 kOhms
Panel Mic (Gooseneck): 5 kOhms

Intercom Channels(Balanced): 300 Ohms
Intercom Channels(Unbalanced): 200 Ohms
Internal Connectors 1 x 3-pin XLR Female
1 x 3-pin XLR Male
Internal Controls 1 x Side Tone Trim
1 x Mic Kill Receive DIP Switch
1 x call Signal Method DIP Switch
1 x Incoming Call Beep DIP Switch
1 x Microphone Type DIP Switch
1 x Incoming Call Speaker Beep DIP Switch
Front Panel Controls and Indicators 1 x Channel Select Button
1 x Panel Mic Button
1 x Headset Button
1 x Listen Button
1 x Call Button
1 x Talk Button
1 x Volume Trim
Power Requirements Phantom Power:
24VDC Nominal (12 - 30VDC, 175mA)
Local Power: 12 - 15VDC, 250mA
Dimensions 9.1 x 2.1 x 6.75"(WxDxH) (231.8 x 54 x 171.5mm)
Weight 5.5 lbs