Telex RTS TT-16 Wireless Intercom IFB 16CH transmitter
Vendor: Telex RTS
Available
Telex RTS TT-16 Wireless Intercom IFB 16CH transmitter
The TT-16 base station transmitter features 16 user selectable frequencies, controlled from front panel control buttons. A backlit LCD display allows the user to select the RF channel used, change Hi-Low RF transmit power, select intercom input source and adjust the input levels. A new feature, Enhanced Dynamic Range (EDR), greatly improves the signal to noise ratio, and works with the TR-16 talent receiver to provide clearer, more dynamic audio. The base station transmitter has a three pin XLR connector on the back of the unit that will accept intercom signal input and is selectable between RTS TW, Audiocom or Clear-Com. Other types of balanced audio input can also be used. The TT-16 also has 1/4-inch input jack on the back of the unit that will accept unbalanced line level signal input. Selection of the intercom type used and signal level adjustment is made from the front panel.
Features
16-channel 64.5 - 67.5 MHz band VHF frequency-agile transmitter base for IFB on-air talent or personal monitoring use with 750' transmission range Front panel rotary frequency selector knob, headphone monitoring output with dedicated volume control Input LED bar graph level meter Simultaneous operation of up to 5 units in same locale 8 tunable frequencies in TV channel 3 band, 8 assigned to channel 4 band for improved interference-free frequency agility Balanced Switchable RTS Ch.1, 2 and Audiocom, unbalanced ClearCom compatibility RF power switch with 50mW maximum RF output Balanced XLR and Unbalanced 1/4" inputs with dedicated level trim controlsOutput Connectors | No |
Input Connectors |
1 x 3-pin XLR, Balanced 1 x 1/4" TS Phone, Unbalanced 1 x BNC Antenna 1 x Coaxial Power In |
Output Level |
50mW max.(Hi) 5mW (Low) |
Input Level | Not Specified by Manufacturer |
Input Impedance |
Balanced: RTS 1, 2 Selected: 200 Ohms Telex Selected: 300 Ohms Unbalanced: 10 kOhms |
Frequency Response | 100 Hz - 10 kHz |
THD + N | <2% |
Minimum Common Mode Rejection | Not Specified by Manufacturer |
Voltage Gain | 30dB (with AGC) |
Voltage Output | Not Specified by Manufacturer |
Call Signaling | No |
Sidetone | No |
Microphone Type | No |
Microphone Input | No |
Phantom Power | No |
Headset Connector | 1 x 1/4" Stereo Phone |
Maximum Current Capacity | 300mA |
Maximum # of Belt Packs | 5 |
Input Power Requirement |
13VAC @ 300mA 15 - 24VDC @ 300mA |
Power Adapter | Yes |
Dimensions | 7.5 x 1.75 x 7" (190.5 x 44.45 x 177.8mm) |
Weight | 3.9 lb (1.8 kg) |