← Previous Product Next Product →

Lectrosonics LT, TX, 50 & 100 mW, 75 MHZ BANDWIDTH, INSTRMNT INPUT, RM READY

Name: Lectrosonics LT, TX, 50 & 100 mW, 75 MHZ BANDWIDTH, INSTRMNT INPUT, RM READY
Brand: Lectrosonics
SKU: LT
Price: 1259.00 USD
Availability: InStock

Vendor: Lectrosonics

Descriptions Lectrosonics LT, TX, 50 & 100 mW, 75 MHZ BANDWIDTH, INSTRMNT INPUT, RM READY The Lectrosonics LT is a digital hybrid wireless bodypack transmitter with a 75 MHz tuning bandwidth, a multi-function toggle...

$1,259.00 $1,724.00

Default Title

Subtotal:

Quantity

Descriptions

Lectrosonics LT, TX, 50 & 100 mW, 75 MHZ BANDWIDTH, INSTRMNT INPUT, RM READY

The Lectrosonics LT is a digital hybrid wireless bodypack transmitter with a 75 MHz tuning bandwidth, a multi-function toggle switch, and the ability to respond to remote commands from RM or smartphone apps. It can be used to capture audio in environments for applications such as broadcast TV, theater, houses of worship, live stage, and more. The Lectrosonics LT has several other features to help you obtain good clear audio, such as selectable RF power at 50 or 100 mW, a compatibility mode to ensure analog receivers will work well with the transmitter, and a Servo microphone input allowing you to use a microphone or line level inputs. In addition, the durable Lectrosonics LT transmitter is enclosed in machined-aluminum housing. It has a detachable antenna that can easily be removed for transportation. An LCD and membrane switch interface make the LT transmitter easy to setup and simple to use. This transmitter operates in the A1 frequency range between 470.100 to 537.575 MHz. and B1 frequency range between 537 to 607 MHz.

Lectrosonics LT Main Features

For Broadcast, EFP and ENG Applications
75 MHz Tuning Range
Digital Hybrid Wireless
Selectable 50 or 100 mW Power

Specifications

Channel	A1 / B1
Frequency Range	A1 : 470 to 537 MHz / B1 : 537.600 to 607.950 MHz
Frequency Selection	Steps: Selectable 25 or 100 kHz
RF Power Output	50 or 100 mW
Pilot Tone	25 to 32 kHz, 5 kHz deviation (Digital Hybrid mode)
Frequency Stability	± 0.002%
Deviation	± 75 kHz max. (Digital Hybrid mode)
Spurious Radiation	60 dB below carrier
Equivalent Input Noise	-120 dBV (A-weighted)
Input Level	Mic: Nominal 2 to 300 mV, before limiting Greater than 1 V maximum, with limiting Instrument: 1 MOhm high level
Input Impedance	2 kOhms
Input Limiter	DSP controlled, dual envelope "soft" limiter with greater than 30 dB range
Gain Control Range	44 dB, digital control
Modulation Indicators	Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation LCD bar graph

Audio Performance

Frequency Response	90 Hz to 20 kHz (+/-1 dB)
Low Frequency Roll-Off	-12 dB/octave, 70 Hz
THD	0.2% (typical)
SNR at Receiver Output	SmartNR: Off 103.5 (no limiting) 108.0 (with limiting) Normal: 107.0 (no limiting) 111.5 (with limiting) Full: 108.5 (no limiting) 113.0 (with limiting) Note: The dual envelope "soft" limiter provides good handling of transients using variable attack and release time constants. Once activated, the limiter compresses 30+ dB of transmitter input range into 4.5 dB of receiver output range, thus reducing the measured figure for SNR without limiting by 4.5 dB
Switch Controls	Top panel slide switch; programmable as power, mute, talkback or no (off) function Side panel membrane switches with LCD interface for power on/off and all setup and configuration controls
Audio Input Jack	1x Switchcraft 5-pin locking (TA5F)
Antenna	Galvanized steel, flexible wire
Battery	2x AA alkaline, lithium, NiMH rechargeable
Battery Life	Duracell Quantum: 4.75 hours Eneloop 2400 mAH NiMH: 6 hours
Additional Ports	USB on side panel for firmware updates
Dimensions (L x W x H)	2.85 x 2.45 x 0.75" (72 x 62 x 19 mm)
Weight	5.9 ounces (169 grams), with alkaline AA batteries