Lectrosonics M2C, ACTIVE ANTENNA COMBINER FOR ANALOG OR DIGITAL TX, 8 X 1

Lectrosonics M2C, ACTIVE ANTENNA COMBINER FOR ANALOG OR DIGITAL TX, 8 X 1

The Lectrosonics M2C is an active antenna combiner which is designed as an ideal matching component to Lectrosonics digital transmitters. Up to eight transmitters can feed a single antenna to minimize cabling in multi-channel systems. The Lectrosonics M2C inputs are isolated to minimize crosstalk and IM (intermodulation) between RF channels. The overall architecture of the design gives excellent performance with low power consumption and heat buildup. The Lectrosonics M2C front panel indicators display the active status of RF inputs. A USB port on the front panel is provided for firmware updates.

Lectrosonics M2C Main Features

• Combines up to eight transmitter RF output signals to feed a single antenna
• Frequency range 470 to 614 MHz
• High overload components minimize intermodulation products
• Up to 100mW input on each port 
• Efficient architecture for low power consumption
• USB port for firmware updates
• Front panel LEDs indicate active channel
• Made in the USA

• RF frequency range: 470 to 614 MHz
• Input impedance: 50 ohm
• Output impedance: 50 ohm
• Input connectors: (8) BNC; 50 ohm
• Output connector: BNC; 50 ohm
• RF gain: 0dB
• Indicators: LEDs; glow green when the signal present; blink red with fault
• RF input threshold for LED indication: 5dBm
• Operating temperature range: –20 to 50° C
• Power requirements: 100-240 VAC; 50/60 Hz
• Power consumption: 60W maximum
• Power inlet fuse: 250 VAC, 2A
• Dimensions: 19.00 x 1.75 x 9.50 in. 483 x 45 x 241 mm.