QSC KW152 15" two-way, 1000W, 60° axisymmetric, active loudspeaker

Vendor: QSC
Description QSC KW152 15" Two-way, 1000W, 60° Axisymmetric, Active loudspeaker This QSC KW152 is representing the evolutionary step in wood-enclosure loudspeakers. QSC system engineers have created this QSC KW152 as being both significantly lighter and smaller than previous wood-enclosure models,...
$1,299.99 $1,549.99
Title

QSC KW152 15" Two-way, 1000W, 60° Axisymmetric, Active loudspeaker

This QSC KW152 is representing the evolutionary step in wood-enclosure loudspeakers. QSC system engineers have created this QSC KW152 as being both significantly lighter and smaller than previous wood-enclosure models, and also to feature all the groundbreaking electronic attributes of their popular K Series. The QSC KW152 features a 1000W (2 x 500W continuous) Class D power module in a QSC-design. It is fitted with a output 1.75-inch HF compression driver, along with its 15” woofer, to handle the high end. The QSC KW152 is providing 60° conical coverage, and can also perform as a monitor floor wedge. Its texture-painted, rugged birch enclosure is making it to look professional as well as stellar sound, ergonomic handles, 35mm pole sockets with Tilt-Direct, with a tour-grade 16-gauge steel grille and M10 rigging points for suspended installs. The K152’s mixer section has two combo inputs plus stereo RCA ins, along with a single summed balanced out and two direct channel outputs. The extensive onboard DSP features Intrinsic Correction and DEEP technologies that enhance system performance, and at the same time GuardRail protects both the performance and your amp module from destructive, unnatural clipping. 

Features

  • 15-inch Woofer; 1.75-inch diaphragm compression driver
  • 60° conical DMT coverage
  • Maximum SPL 133 dB peak
  • 1000 watt Class D power modules in all models (2 x 500 W continuous)
  • Onboard mixer with two combo XLR and ¼⁻ᶦⁿᶜʰ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
  • Extensive DSP featuring DEEP™ and Intrinsic Correction™ enhances system performance
  • DMT™ (Directivity Matched Transition) ensures uniform coverage across the entire sound field
  • Rugged, texture-painted birch enclosures
  • Four-position Mic/Line gain (full-range models)
  • Tour-grade 16 gauge steel grilles
  • Comfortable ergonomic handles
  • 35 mm pole sockets with Tilt-Direct™
  • M10 rigging points for suspended installation
Configuration 15-inch 2-way trapezoidal
Transducers
Low-frequency
Mid-frequency 
High-frequency

15-inch cone transducer

-

1.75-inch diaphragm compression driver
Frequency Response (-6 dB) 47 Hz to 18 kHz
Frequency Range (-10 dB) 44 Hz to 20 kHz
Nominal Coverage (-6 dB) 60° axisymmetric
Maximum SPL1 133 dB peak
Amplifier
Power Output2 1000 W Class D (500 W LF + 500 W HF) continuous
2000 W peak
Input Impedance Channel A XLR / ¼⁻ᶦⁿᶜʰ:
Mic gain setting Balanced Unbalanced
0 dB 38 kΩ 19 kΩ
+12 dB 10 kΩ 5 kΩ
+24 dB 2.66 kΩ 1.33 kΩ
+36 dB 660Ω 330Ω
Channel B XLR / ¼⁻ᶦⁿᶜʰ: 38 kΩ balanced / 19 kΩ unbalanced
Channel B RCA: 10 kΩ
Controls Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) 
Indicators  Power, Signal A, Signal B, Standby, Limit, Mic (24 dB and 36 dB settings)
Connectors  Balanced female XLR/¼⁻ᶦⁿᶜʰ line/mic level input, Balanced female XLR/¼⁻ᶦⁿᶜʰ line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan 
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ 
Transducer Protection Thermal limiting, excursion limiting 
AC Power Input Universal power supply 100–240 VAC, 50 to 60 Hz 
AC Power Consumption
(1/8 Power)
100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint
Grille Black powder coated 16 gauge steel
Dimensions (HWD) inches 32.1 x 17.5 x 15.2
Dimensions (HWD) mm 816 × 445 × 386
Net Weight 64 lb / 29 kg
Available Accessories KW152 cover, KW M10 kit