Meyer Sound USW-210P-3, 2x10" 2-Way Active Subwoofer, M8, 3-Pin Input

Meyer Sound USW-210P-3, 2x10" 2-Way Active Subwoofer, M8, 3-Pin Input

If you have limited space but require full bass response, the Meyer Sound USW-210P-3 was created to solve your problem. A compact and narrow subwoofer that stands 41.33" high and just 12" wide and deep (3.44' x 2' x 2'), the USW-210P-3 can be mounted vertically or horizontally to a wall or ceiling. It's also possible to mount the cabinet in a free-standing vertical orientation using an optional aluminum base plate. Don't let the size fool you. The 210P can deliver 1800 watts of Class D power from a 2-channel power amp that drives a pair of 10" speakers. The bass reflex cabinet produces more output than typical 12" single driver designs while taking up less space. The integrated 1800 watt 2-channel Class D amplifier has dedicated processing that provides control over crossover, driver protection, and frequency and phase response. And, with a frequency range down to 30Hz, you'll be able to fill the room with deep, rich bass. Meyer designed the 210P from premium birch with a durable black textured finish, but knowing aesthetics are important, the speaker is available in custom colors and finishes. A weather protection model can be ordered to transform the 210P-3 into your best choice for outdoor applications. Meyer Sound has been solving audio problems for 40 years, let the USW-210P-3 solve yours today.

Meyer Sound USW-210P-3 Main Features

• Compact cabinet with small footprint and extraordinary power-to-size ratio
• High peak power output with extremely low distortion
• Exceptional linearity, transient reproduction, and low-frequency clarity
• Self-powered design for simplified setup and increased reliability
• Stackable and flyable in regular and cardioid arrays with splay options
• Integral pole-mount receptacle to facilitate pairing with LINA or ULTRA Series loudspeakers

• Acoustic
• Operating Frequency Range: 30–140Hz
• Frequency Response: 32–123Hz ±4dB
• Phase Response: 40–123Hz ±30°
• Linear Peak SPL: 126dB with crest factor >11.5dB (M-noise), 126dB (Pink noise), 127dB (B-noise)
• Coverage: 360° (single unit), varies with number of units and configuration
• Transducers
• Low Frequency: Two 10-inch cone drivers, nominal impedance 4Ω
• Audio Input
• Type: Differential, electronically balanced
• Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
• Connectors x 4: XLR 3- or 5-pin female input with male loop output
• Input Impedance 10kΩ differential between pins 2 and 3
• Wiring
• Pin 1: Chassis/earth through 1kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 2: Signal + Pin 3: Signal -
• Case: Earth ground and chassis
• Nominal Input Sensitivity
• 0dBV (1V rms) continuous is typically the onset of limiting for noise and music
• Input Level
• Audio source must be capable of producing a minimum of +20dBV (10V rms) into 600Ω to produce maximum peak SPL over the operating bandwidth of the speaker
• Amplifier
• Type: 2-channel (class D) with crossover
• Total Output Power: 1800W peak
• THD, IM, TIM: < 0.02%
• Load: 4Ω per channel
• Cooling: Convection
• AC Power
• Connector: powerCON 20 input with loop output
• Automatic Voltage Selection: Automatic
• Safety Agency Rated Operating Range: 100–240VAC, 50–60Hz
• Turn-on and Turn-off Point:s 90VAC turn-on, no turn-off; internal fuse-protection above 265VAC
• Current Draw
• Idle Current: 0.27A rms (115VAC); 0.25A rms (230VAC); 0.29A rms (100VAC)
• Max Long-Term Continuous Current (>10 sec): 1.4A rms (115VAC); 0.7A rms (230VAC); 1.6A rms (100VAC)
• Burst Current (less than 1 sec): 4.5A rms (115AAC); 2.1A rms (230VAC); 4.8A rms (100VAC)
• Maximum Instantaneous Peak Current: 9.7A peak (115VAC); 4.6A peak (230VAC); 10.8A peak (100VAC)
• Inrush Current: less than 20A peak
• Physical
• Dimensions W: 12.00in (304.8mm) x H: 41.33in (1049.8mm) x D: 12.00in (304.8mm)
• Weight: 56lbs (25.40kg)
• Enclosure: Premium birch plywood, slightly textured black finish; powder-coated, stamped-steel, protective grille
• Rigging: Top and bottom mounting points with M8 threads
• RMS Network (Optional)
• Type Equipped for two-conductor, twisted-pair network; reports all amplifier operating parameters to host computers