Electro Voice TX1122FM 500 watts, 12-inch two-way dedicated vertical floor monitor, passive, 90° x 50° horn pattern, all-new SMX2121 woofer, DH3 compression driver, patent pending SST

Electro Voice TX1122FM 500 watts, 12-inch two-way dedicated vertical floor monitor, passive, 90° x 50° horn pattern, all-new SMX2121 woofer, DH3 compression driver, patent pending SST (Signal Synchronized Transducers), Backbone grille, angled input panel, rotatable logo, black EVCOAT.

The Electro Voice TX1122FM Tour-X Floor Monitor is a compact, and capable of a high output for use on small to medium-sized stages. When high-quality vocal and instrument output is required reach for this lightweight monitor package.

This enclosure is utilizing signal-synchronized transducers, a design that is aligning the woofer and compression driver by locating them on separate baffles, and is integrating a low distortion port between the baffles. This is offering the tremendous advantages over traditional flat baffle construction: the acoustic centers of the compression and driver woofer are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, this all achieve linear phase response: and the size of both baffles are smaller than a single baffle, that result in a smaller footprint.

It is also utilizing the DH3, high output 1.25" titanium compression driver, partnered to a Constant Directivity 90 degree x 50 degree horn.

The SMX2121 12" woofer has an FEA enhanced magnet structure and shorting ring fro ultra-low distortion. The crossover is using a steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and comes with a built in protection circuit for long term reliability. The combination of the transducers, enclosure, and crossover is resulting in a compact floor monitor totally capable to reach a very high output levels before feeding back.

A lot of features are making the Electro Voice TX1122FM well suited for floor monitor use. The internally braced enclosure is made out of a combination of plywood and MDF, and coated with EVCoat for ultimate strength and durability. The unique grille design is very strong and dent resistant, and features a rotatable logo. 4-way handles are allow for gripping in a variety of positions. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, keeping the connectors hidden and away from the performers on stage.

• Two-way, high-output design
• Vented LF enclosure 
• Neutrik Speakon® paralleled pass-through connectors
• Two integrated handles
• Ideal for small-to-medium stages
• Signal Synchronized Transducers™ for woofer/tweeter alignment
• Low-distortion SMX2121 woofer with fully symmetric drive
• 1.25-inch DH3/2010A titanium HF compression driver
• Constant-directivity 90º H x 50º V horn
• Integrated 24 dB/octave crossover with HF protection
• 99 dB sensitivity, 132 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Black EVCoat™ finish