Electro Voice ZX1I-100 / ZX1I-100W 200 watt 8" two-way weatherized speaker system with EV DH2005 hi-frequency compression driver. 100x100 coverage pattern. BLACK or WHITE

Electro Voice ZX1I-100 / ZX1I-100W 200 watt 8" two-way weatherized speaker system with EV DH2005 hi-frequency compression driver. 100x100 coverage pattern. BLACK or WHITE

The Electro Voice ZX1I-100 (BLACK) or Electro Voice ZX1I-100W 200 (WHITE) is an 8" 2-way 200W weather-resistant passive loudspeaker capable to offer a high-performance, full-range sound reinforcement for both indoor and outdoor installed applications in patios, stages, and arenas. The Electro Voice ZX1I-100's 8" woofer and titanium high-frequency compression driver yield a 60 Hz to 20 kHz frequency response and are boasting a 200W continous power handling rating (800W peak). The high-frequency driver is mounted in a rotatable 100 x 100° horn for broad, even dispersion.

The input to the loudspeaker, which is provided by a removable 4-pin Euroblock connector, is fed to an internal crossover that properly distributing the frequencies to the drivers. The lightweight ABS resin cabinet is outfitted with a heavy-duty QuickSAM mounting system, enabling a fast and secure installation. With its molded enclosure design, two-layer grille, and IEC 529 and MIL-SPEC-810 ratings, the Electro Voice ZX1I-100 loudspeaker is built capable to withstand the stress of outdoor use.

• Two-way 200W full-range passive loudspeaker for installed indoor/outdoor applications in event stages, restaurant patios, and arenas
• Weather-resistant to IEC 529 and MIL-STD-810 environmental specs
• 8" EV8L long-excursion, high-output woofer with a weatherized, treated cone delivers smooth low-frequency performance and reliability
• Velocity-compensated port design overcomes the limitation of many small cabinet loudspeakers and enables enhanced low-frequency response
• DH2005 compression driver with 1.25" voice coil, titanium diaphragm, and 1" exit
• Rotatable 100 x 100° horn coverage for broad, even dispersion
• Internal crossover network preceded by a passive limiter for full-bandwidth overload protection
• Removable 4-pin Euroblock connector
• Injection-molded, high-impact ABS resin enclosure and powder-coated steel grille with hydrophobic cloth and acoustic foam protect the drivers from the elements
• QuickSAM mounting system allows the installer to simply snap the speaker onto the bracket, then tighten it to the desired position
• AB-ZE bracket kit (available separately) allows multiple units to be mounted together

• Color: Black, white
• Input Connections: 4-pin Phoenix
• Nominal Impedance: 8 Ω
• Speaker Type: Fullrange, Mid-High, Two-Way
• Frequency Response (-3 dB): 60 - 20000 Hz
• Frequency Response (-10 dB): 48 - 20000 Hz
• Internal Crossover: Yes
• Recommended High-Pass Frequency: 40 Hz
• Sensitivity 1 W/1 m: 94 dB
• Max. SPL/1m (calc): 123 dB
• Coverage (Nominal -6 dB) H: 90/100 Rotatable
• Coverage (Nominal -6 dB) V: 50/100 Rotatable
• Rotatable Horn: Yes
• System Power Handling (Continuous/Program/Peak): 200//800 Watts
• LF Transducer: 8-inch EV8L
• HF Transducer: 1.25-inch DH2005
• Crossover Frequency: 1700 Hz
• Minimum Impedance: 6 Ω
• Enclosure Material: High Impact Polystyrene
• Flying: Yes
• Outdoor: Yes
• Grill: Polyester Powder Coated, 18GA Galvanized Steel
• Height: 451 mm (17.76")
• Width: 282 mm (11.1")
• Depth: 263 mm (10.35")
• Weight Net: 8.4 kg (18.52 lbs)