← Previous Product Next Product →

JBL ASB6112 Compact High Power Single 12" Subwoofer

JBL ASB6112 Compact High Power Single 12" Subwoofer

Name: JBL ASB6112 Compact High Power Single 12" Subwoofer
Brand: JBL
SKU: ASB6112-WH
Price: 1990.00 USD
Availability: InStock

Vendor: JBL

JBL ASB6112 Compact High Power Single 12" Subwoofer The ASB6112 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive® dual coil dual gap 12" woofer. This woofer features...

Color

or Call for pricing: 1-877-477-6432

Description

JBL ASB6112 Compact High Power Single 12" Subwoofer

The ASB6112 is a high power, lightweight front-loaded vented subwoofer enclosure housing JBL’s 2263H Differential Drive® dual coil dual gap 12" woofer. This woofer features neodymium magnet and ultra robust cone for extra long life.

Features

2263H 12" Differential Drive® dual voice coil dual gap, neodymium magnet transducer
1000 watts continuous pink noise,
4000 watts peak power handling capacity
Large vent area for high output with low distortion
FIR Tuning Set Matches Phase Profile to Full-Range Models
For ground-stacked or suspended applications in stand-alone arrays or in combination with other AE Series products

Specifications

Frequency Range (-10dB)	35 Hz – 1 kHz
Frequency Response (±3 dB)	43 Hz – 1 kHz
Transducer Power Rating (AES)	1000 W (4000 W peak), 2 hrs.
System Power Rating	700 W (2800 W peak), 100 hrs.
Maximum SPL (1m)	40 Hz - 300 Hz: 126 dB-SPL cont avg (132 dB peak)
System Sensitivity	40 Hz - 300 Hz: 96 dB-SPL,1W (2.83V) @ 1m
Nominal Impedance	8 ohms
LF Driver	1 x 2263H, 305 mm (12 in) dia., 75 mm (3 in) Dual Coil Dual Gap neodymium Differential Drive® driver
Enclosure	Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment	16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
Finish	Black DuraFlex™ finish.White available upon request.
Grille	Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector	NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental	Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in vertical orientation)	406 x 369 x 483 mm(16.0 x 14.5 x 19.0 in)
Net Weight (each)	16.3 kg (36.0 lb)
Optional Accessories	M10 x 35 mm forged shoulder eyebolts with washers.
Nominal LF Driver Impedance	8 ohms