Martin Audio XD15, High Power 2-way Loudspeaker System with 15 inch

Vendor: Martin Audio
Martin Audio XD15, High Power 2-way Loudspeaker System with 15 inch The Martin Audio XD15 is a 15” (380mm) LF driver has a lightweight 4” (100mm) voice coil and flux demodulation rings to reduce...
$3,000.00
Title

Martin Audio XD15, High Power 2-way Loudspeaker System with 15 inch

The Martin Audio XD15 is a 15” (380mm) LF driver has a lightweight 4” (100mm) voice coil and flux demodulation rings to reduce distortion at high excursions. Its neodymium motor system merged its high sensitivity with low weight and advanced cooling decreases power compression to negligible levels. The 1.4” (35mm) exit HF driver has a 3” (75mm) pure titanium dome and ultra-high flux neodymium motor system for maximum efficiency. The internal LF/HF crossover is switchable between passive or bi-amp operation, depending on user requirements. The Martin Audio XD15 is the best solution for very high-power applications where flexibility, ease of installation, and speed of deployment are important factors. The versatile, multiangle enclosure and rotatable horn facilitate either horizontal or vertical orientation, and comprehensive brackets support the full variety of mounting options – including surface, ceiling, and pole mount. Integral M8 inserts for simple eyebolt suspension increase the options even further. In its horizontal configuration, the Martin Audio XD15 is also best as a very high-output stage monitor. When used in bi-amp mode, or with a subwoofer such as the Wavefront SX118 or SX218, it is recommended that the Martin Audio XD15 is used with the Martin Audio DX0.5 or DX4.0 controller. When operated as a passive system, it may be used without a controller but will benefit from the DX0.5 or DX4.0.

Martin Audio XD15 Main Features

  • Versatile, multi-angle plywood enclosure
  • Very high-output two-way system
  • 15" (380mm)/4" (100mm) coil, ultra-long excursion, low-distortion neodymium LF driver
  • 1.4" (35mm) exit, titanium dome, neodymium HF compression driver
  • Rotatable 80° x 50° horn for portrait or landscape orientation
  • Switchable passive/bi-amp crossover
  • 8-ohm nominal impedance
  • Integral pole-mount and M8 rigging inserts
  • Comprehensive mounting options and accessories
TYPE  Very high-output, passive/bi-amp two-way system
FREQUENCY RESPONSE  55Hz-18kHz ± 3dB
 -10dB @ 45Hz
DRIVERS
  • 15" (380mm)/4" (100mm) voice coil, long- excursion, neodymium magnet LF driver
  • 1.4" (35mm) exit/3" (75mm) voice coil, titanium dome, neodymium magnet HF compression driver
RATED POWER (1)
  • LF: 600W AES, 2400W peak
  • HF: 80W AES, 320W peak
SENSITIVITY (2)
  • FR: 99dB
  • LF: 100dB
  • HF: 108dB
MAXIMUM SPL (3)
  • FR: 126dB continuous, 132dB peak
  • LF: 127dB continuous, 133dB peak
  • HF: 127dB continuous, 133dB peak
NOMINAL IMPEDANCE
  • FR/LF: 
  • HF: 16Ω
DISPERSION (-6DB)
  • 80° horizontal
  • 50° vertical user rotatable
CROSSOVER  1.75kHz switchable passive/bi-amp
ENCLOSURE  68 liter, multi-laminate birch ply
FINISH  Textured black polyurea coating
PROTECTIVE GRILLE  Black perforated steel, Declon® backed
CONNECTORS  2 x Neutrik® NL4
INPUT CONNECTIONS
  • FR/LF (+,-): 1+,1-
  • HF (+.-): 2+,2-
FITTINGS
  • 17 x M8 threaded inserts
  • 1 x Pole mounting socket
  • 2 x Pocket Handle
DIMENSIONS
  • (W) 429mm x (H) 690mm x (D) 414mm
  • (W) 16.9ins x (H) 27.2ins x (D) 16.3ins
WEIGHT  32Kg (70.5lbs)