Community DP8-B (Black) / DP8-W (White) 8-Inch Pendant Loudspeaker System

Community DP8-B (Black) / DP8-W (White) 8-Inch Pendant Loudspeaker System

The Community DP8-B for Black / DP8-W for White, is a professionally designed high performance 8-inch pendant loudspeakers that's created for open architecture spaces or any location where a stylish pendant form factor is truly needed. It comes featuring high power handling, higher sensitivity and realistic sound reproduction, the DP8 is created as the more focused big brother to the DP6. D SERIES pendant loudspeakers are possible to be used in a wide variety of speech and music applications. They are equipped along with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP8 is possible to be combined along with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design comes using a separate magnets for the LF and HF drivers for having a reduced distortion and industry-leading sensitivity, thereby it permits 3 dB to 6 dB greater output level while also requires half the amplification power of competing products at the same time. An easy-access selector switch is conveniently located on the face of the loudspeaker for having selectable 8 ohm or 70V/100V operation, while an integrated rear cover comes hiding all wiring and hanging hardware for an aesthetically pleasing installation.

Includes

• Two PHK-15 pendant hang kits
• Enclosure ABS plastic rear cover
• Rear cover ingress weather plug

Features

• Stylish, contoured contemporary pendant design
• Same components and voicing as the Distributed Design ceiling and surface mount loudspeaker family
• Consistent, wide dispersion up to 16 kHz
• True coaxial loudspeakers with HF compression drivers
• Tru-Phase™ high-frequency waveguide
• Patented Carbon Ring Cone Technology™
• High efficiency, high output, high intelligibility, low distortion
• Paintable enclosure constructed of high-impact ABS plastic to reduce resonances
• Easy-access power tap switch for selectable 8 ohm or 70V/100V operation
• Integrated rear cover hiding all wires and hanging hardware
• Weather-resistant construction with treated drivers and two layer powder coated grilles
• ETL listed to comply with UL1480
• Available in standard black or white finishes
• Five-year warranty

• Operating Range: 60 Hz - 22 kHz
• Frequency Response: 80 Hz - 20 kHz (± 5dB)
• Max Input Ratings (8 ohm): 150W continuous, 375W program, 34.6 volts RMS, 69.3 volts momentary peak
• Transformer Taps:
• 70V: 120W, 60W, 30W, 15W and low impedance
• 100V: 120W, 60W, 30W
• Sensitivity (1W/1m): 95 dB SPL (120 Hz to 12.5kHz 1/3 octave bands); 94 dB SPL (250 Hz to 4 kHz speech range)
• Maximum Output: 117 dB SPL / 123 dB SPL (peak 8ohm)
• Nominal Impedance: 8 ohms
• Minimum Impedance: 5.6 ohms @ 200 Hz
• Nominal Coverage: 100º conical (1 Hz to 6 kHz);115º conical (500 Hz to 6 kHz)
• Crossover Frequency: 1.3 kHz
• Drivers:
• Low Frequency: 1 x 8-inch
• High Frequency: 1 x 1.25-inch exit compression driver
• Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple® brand adjustable height cable fasteners.
• Finish: Black or White
• Grille: Powder coated steel with safety line, black or white finish, paintable
• Baffle: Reflex loaded UL 94V-0 rated ABS
• Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg).
• Safety Agency Ratings: ETL listed to comply with UL1480 and CSA60065. Suspension system and Gripple® brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81.
• Dimensions:
• Height: 17.720 inches (450.1 mm) enclosure
• Diameter: 13.406 inches (340.5 mm) face diameter
• Weight: 16.5 lbs (7.5 kg) includes cables and Gripples