Meyer Sound UPJUNIOR-WP-3, 8" 2-Way Active Speaker, Weather Protection, 3-Pin Input

Vendor: Meyer Sound
Descriptions Meyer Sound UPJUNIOR-WP-3, 8" 2-Way Active Speaker, Weather Protection, 3-Pin Input The Meyer Sound UPJUNIOR-WP-3 is an ultracompact VariO™ loudspeaker brings the sonic signature, flexible rigging, and extraordinary power‑to‑size ratio of the...
$0.00
Title

Meyer Sound UPJUNIOR-WP-3, 8" 2-Way Active Speaker, Weather Protection, 3-Pin Input

The Meyer Sound UPJUNIOR-WP-3 is an ultracompact VariO™ loudspeaker brings the sonic signature, flexible rigging, and extraordinary power‑to‑size ratio of the award-winning UPJ-1P to an even more compact package perfectly suitable for a broad range of applications. The Meyer Sound UPJUNIOR-WP-3 combines the advantages of self-powered systems with the placement and arraying flexibility afforded by an 80° x 50° VariO rotatable horn and QuickFly® rigging. Though remarkably compact and lightweight, the UPJunior delivers a linear peak SPL of 123.5dB with 18.5dB crest factor, making it suitable for use as either a single, primary loudspeaker or within multi-cabinet horizontal and vertical arrays. Meyer Sound designed the Meyer Sound UPJUNIOR-WP-3 for flexibility. Whether oriented vertically or horizontally, its easily rotatable VariO horn facilitates the optimum horizontal and vertical coverage in any situation.

Meyer Sound UPJUNIOR-WP-3 Main Features

  • Exceptional fidelity and extended high frequency enhance performance
  • Compact package delivers outstanding power capability
  • Predictable and consistent performance ensure system design flexibility
  • VariO horn enables versatile coverage options, whether orienting loudspeakers horizontally or vertically
  • Extraordinarily flat amplitude and phase response provide tonal accuracy and precise imaging
  • Constant-Q horn affords uniform response throughout the coverage area
  • QuickFly rigging facilitates mounting as a single cabinet or flying within arrays
  • Acoustic
    • Operating Frequency Range: 70Hz – 20kHz
    • Frequency Response: 76Hz – 18kHz ±4dB
    • Phase Response: 250Hz – 18kHz ±45°
    • Linear Peak SPL: 123.5dB with 18.5dB crest factor (M-noise), 121.5dB (Pink noise), 121dB (B-noise)
  • Coverage: 80° x 50° (rotatable horn)
  • Transducers
    • Low Frequency: One 8-inch cone driver with neodymium magnet; 4Ω nominal impedance
    • High Frequency: One 2-inch compression driver; 12Ω nominal impedance
  • Audio Input
    • Type: Differential, electronically balanced
    • Maximum Common Mode Range: ±15VDC, clamped to earth for voltage transient protection
    • Connectors: XLR 3-pin female input with male loop output; optional 5-pin XLR connectors accommodate both balanced audio and RMS signals.
    • Input Impedance:10kΩ differential between pins 2 and 3
  • Wiring
    • Pin 1: Chassis/earth through 220kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal – (optional polarity reversal switch)
    • Case: Earth ground and chassis
  • Nominal Input Sensitivity: 0dBV (1.0V rms) continuous is typically the onset of limiting for noise and music
  • Input Level Audio: source must be capable of producing of +20dBV (10V rms) into 600Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.
  • Amplifier
    • Type: Two-channel complementary MOSFET output stages (class AB/bridged)
    • Total Output Power: 580W peak
    • THD, IM, TIM: less than 0.02%
    • Cooling:Forced air cooling over amplifier heatsink
  • AC Power
    • Connector: powerCON 20 input with loop output
    • Automatic Voltage Selection: 90–265VAC
    • Safety Rated Voltage Range: 100–240VAC, 50–60Hz
    • Turn-on and Turn-off Points: 90VAC turn-on, no turn-off; internal fuse-protection above 265VAC
  • Current Draw
    • Idle Current: 0.448A rms (115VAC); 0.285A rms (230VAC); 0.497A rms (100VAC)
    • Maximum Long-Term Continuous Current (>10 sec): 2.55A rms (115VAC); 1.55A rms (230VAC); 2.75A rms (100VAC)
    • Burst Current (
    • Maximum Instantaneous Peak Current: 12.0A peak (115VAC); 9.0A peak (230VAC); 13.0A peak (100VAC)
    • Inrush Current: 15.0A peak (115VAC); 13.0A peak (230VAC); 15.0A peak (100VAC)
  • RMS Network (Optional)
    • Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.
  • Physical
    • Dimensions W: 9.00in (229mm) x H: 19.04in (484mm) x D: 10.20in (259mm)
    • Weight: 28lbs (12.7kg)
    • Enclosure: Premium multi-ply birch with slightly textured black finish
    • Protective Grille: Powder-coated, hex-stamped steel with acoustical black mesh
  • Rigging: Aluminum end plates for mounting/flying cabinets with QuickFly and standard rigging options; metric M8 threaded points used for all UPJunior rigging