Meyer Sound MPS-482HP-5 Power Supply

Meyer Sound MPS-482HP-5 Power Supply

The Meyer Sound MPS-482HP-5 is professionally designed capable of sending power and audio to two speakers, for IntelligentDC systems that comes along with limited loudspeaker requirements or for supplementing the systems that fall between multiples of eight. Its silent, fanless operation means that it is capable to share the same acoustic space as your loudspeakers, and mounting options for letting you to install it in a rack or remotely on a wall, ceiling, or other surface.

The two-channel Meyer Sound MPS-482HP-5 power supply that comes along with audio and 48V DC is capable of greatly expanding the flexibility and cost-effectiveness of Meyer Sound’s exclusive IntelligentDC™ remotely self-powered systems. Enclosed in a rugged, compact, 1RU, half-rack-width enclosure housing, the Meyer Sound MPS-482HP-5 is professionally made to be ideal for applications that requires a small channel count or the capability for mounting remotely on a wall or ceiling (with the use of the MUB-MPS482 U-bracket). Rack mounting one or two MPS-482HPs in one standard 19-inch, 2RU rack space is also possible along with the optional RMT-MPS482 Rack Tray.

Carefully designed for powering up the Meyer Sound loudspeakers that are featuring IntelligentDC technology, the MPS-482HP is particularly advantageous by the time it is creating two-channel systems that comes with compact loudspeakers, such as the MM-4XP, UP-4XP, and UP-4slim. Additionally, it is capable to power up to six Ashby-5C or four Ashby-8C ceiling loudspeakers and is also ideal for powering surrounds in immersive configurations.

The MPS-482HP is capable of powering two loudspeakers and its applications include corporate systems, hospitality suites, home theatre, and retail. It is pairing perfectly along with any of Meyer Sound's IntelligentDC loudspeakers, that includes the MM-4XP, UP-4XP and UP-4slim models, or in larger installations alongside MPS-488HP units.

Applications:

• Conference rooms
• Theaters
• Constellation systems
• Cinema and television post-production facilities
• High-end private theaters
• Supplemental power supply for any IntelligentDC loudspeaker system

Features:

• Offers two channels to power Meyer Sound loudspeakers that require an external IntelligentDC power supply
• Efficiently delivers power to installations requiring smaller channel counts
• Works as a supplemental power supply to the MPS-488HP power supply for applications requiring more than eight and less than sixteen channels
• Enables remote mounting of power supply and routing of DC power and balanced audio to loudspeakers with composite cables
• Fanless design operates quietly in acoustically sensitive environments
• Enclosure includes threads for mounting in accessories as well as cable-routing, strain-relief tabs
• Front panel LEDs provide system feedback on voltage status, load current levels, and fuse status

• Front Panel
• LEDs per channel
• Two blue LEDs to indicate presence of output voltage
• Two green LEDs to indicate load current
• Two red LEDs to indicate blown or open fuse
• Fuse: Use only Meyer Sound PN 420.041 when replacing
• Rear Panel
• Audio Input
• Two XLR 3-pin female connectors OR one 6-position Phoenix connector (not summing to the XLR inputs)
• One Link Switch. Sends signal from channel 1 input to channel 2
• Channel Output: Two Phoenix 5-pin male connectors
• Output Wiring
• Two pins for DC power, three pins for balanced audio
• Pin 1: 48VDC -
• Pin 2: 48VDC +
• Pin 3: Chassis/earth through 220kΩ, 1000pF, 15V clamp network to provide virtual ground lift at audio frequencies
• Pin 4: Signal -
• Pin 5: Signal +
• Output Voltage: 48VDC per channel
• AC Power
• AC Connector: powerCON 20
• Voltage Selection: Automatic
• Safety Rated Voltage Range: 100–240VAC; 50–60Hz; 220W maximum
• Current Draw
• Idle Current: 0.139A (115VAC, 60Hz);
• 0.071A (230VAC, 50Hz)
• 0.150A rms (100VAC, 60Hz)
• Physical
• Dimensions: 1RU in height, 1/2 width rack mount
• W: 8.5in (216mm) x H: 1.85in (47mm) x D: 8.62in (219mm)
• Weight: 4.4lbs (2kg)
• Rigging
• M6 threads on sides and bottom to support mounting; optional MUB-MPS-482 U bracket for flat surface mounting; optional RMT-MPS-482 Rack Mount Tray for mounting two MPS-482HPs in a standard 19-inch wide, 2 RU rack slot
• Environmental
• Operating Temperature: 0°C to +45°C
• Non-operating Temperature: -40°C to +75°C
• Humidity: To 95% at 35°C
• Operating Altitude: To 5,000m (16,404ft)
• Non-operating Altitude: To 6,300m (25,000ft)
• Shock: 30g 11msec half-sine on each of 6 sides
• Vibration: 10–55Hz (0.010m peak-to-peak excursion)