RCF ES-3080 Amplifier w/ Mixer and Bluetooth Audio (70V/100V/4 ohm)

RCF ES-3080 Amplifier w/ Mixer and Bluetooth Audio (70V/100V/4 ohm)

RCF ES-3080 is professionally designed as an 80 W mixer-amplifier that comes along with a MP3 player which is directly accessible on the front panel. It is capable to read USB sticks, SD cards, comes with an auxiliary input port that comes along with 3.5mm jack and Bluetooth technology designed for the connection that comes along with external sources. Moreover, it is capable of offering 2 mic-line audio inputs on removable connectors (the first input also has an XLR socket). Input 2 also comes along with an RJ 45 port designed for quick connection of an RCF BM 3001 paging microphone (through CAT5 cable). The amplifier output is made available either for use in low impedance speakers (min. 4 O) or 100 – 70 V constant voltage line (for speakers having 100 – 70 V transformers). Input 1 comes along with a signal detection circuit (‘VOX’) designed for automatic priority. Inputs 1 and 2 is capable to access the priority through an external command (connected to either the removable connector or the RJ 45 port).

The MUSIC ON HOLD output directly is sending the internal MP3 player signal to additional mixers, amplifiers, phone systems (‘music on hold’ function), etc. The PRE OUT output is designed for sending the signal (the same routed to the internal amplifier) to additional amplifiers. The 2 mic-line inputs have a high-pass filter (with a common on/off dip-switch) that are created useful for improving a speech intelligibility. The internal MP3 player and the AUX INPUT have tone controls (common for both). Front panel LEDs are created for indicating the device state (ON, PROT), priority circuit enabled (PRIOR) and the signal level / peak (SIG/PK).

• Audio source with 80W power amplifier
• MP3 player controlled from the front panel
• MP3 inputs: USB flash, SD card, AUX jack 3.5mm
• Bluetooth connection with external devices
• 2 universal inputs on removable screw-terminals and 1 AUX input
• Configurable priority settings, VOX facility on input 1
• Configurable priority settings, VOX facility on input 1
• Auxiliary output MUSIC ON HOLD to send the audio signal to external amplifiers or telephone switchboards
• PRE OUT connector for additional power amplifiers
• HI-PASS control (inputs 1 and 2)
• Auxiliary input on RCA connector and MP3 player equipped with independent tone controls (bass and treble) and gain

Amplifier specifications
NUMBER OF CHANNELS:
1

POWER OUTPUT (HI-Z):
80 W RMS

FREQUENCY RESPONSE (-3DB):
50 Hz ÷ 16 kHz

DISTORTION (THD+N) @ 1 KHZ NOMINAL POWER:
<0.3 %
Input section
BALANCED:
5

LINE CONNECTORS:
JACK, RCA

LINE INPUTS:
2

MIC+LINE CONNECTORS:
Euroblock, XLR

MIC+LINE INPUTS:
2

MIC+LINE PHANTOM:
30 V DC

VOX: (MIC+LINE):
Yes

MONO:
4

PAGING COMMAND:
Contact

PAGING CONNECTORS:
RJ45

PAGING INPUTS:
1

STEREO:
2

TOTAL NUMBER OF INPUTS:
5

UNBALANCED:
1
Output section
SIGNAL OUTPUT NUMBER:
2

SIGNAL OUTPUT CONNECTORS:
RCA

POWER OUTPUT CONNECTORS:
Euroblock
Processing
TONE CONTROLS:
Yes

HIGH-PASS FILTER:
150 Hz
Controls
CONFIGURATION:
DIP switch, Front panel

PRIORITY:
Yes

MUSIC ON HOLD:
Yes

CHIME TONE:
Yes
Protections
COOLING:
Convection

SHORT CIRCUIT:
Yes

THERMAL:
Yes

DC DELAY:
Yes

FUSES:
Yes
Audio sources
USB PEN DRIVES:
Yes

SD CARD:
Yes

BLUETOOTH:
Yes
Power requirement
OPERATING VOLTAGE:
220-240/115 V~ 50/60Hz

VOLTAGE SELECTION:
Internal

POWER CONSUMPTION:
160 W
Standard compliance
CE MARKING:
Yes
Physical specifications
CABINET/CASE MATERIAL:
Metal

COLOR:
Black

RACK MOUNTING:
19", 2U , Optional rack mounting accessory required
Size
DEPTH:
230 mm / 9.06 inches

HEIGHT:
88 mm / 3.46 inches

WEIGHT:
3.9 kg / 8.6 lbs

WIDTH:
442 mm / 17.4 inches
Shipping informations
PACKAGE DEPTH:
500 mm / 19.69 inches

PACKAGE HEIGHT:
200 mm / 7.87 inches

PACKAGE WEIGHT:
5.4 kg / 11.9 lbs

PACKAGE WIDTH:
330 mm / 12.99 inches