Audix M1280B, MIC, COND, MICRO, 12mm CARD, 25' CBL, 2, Miniaturized condenser microphone with RFI immunity and extended frequency response.

Audix M1280B, MIC, COND, MICRO, 12mm CARD, 25' CBL, 2, Miniaturized condenser microphone with RFI immunity and extended frequency response.

The Audix M1280B is a miniaturized condenser mic with a fully integrated preamp and it has a detachable cable, and also it has a complete immunity from RF interference caused by cell phones and GSM devices. The Audix M1280B condenser microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional or shotgun capsules. The Audix M1280B also features a very wide frequency response and may be used in a wide variety of live, studio and broadcast applications.

Audix M1280B miniaturized condenser mic is also available with a wide array of clips and accessories allowing the mic to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations.

Audix M1280B Product Features

• Lightweight, small profile
• Miniaturized preamp circuitry
• No external power adapter needed
• 12 mm gold vapor diaphragm
• Immune to RF interference
• Extremely low noise, high SPL handling
• Designed, assembled, manufactured & tested in the USA
• 3 year warranty

Transducer Type: Condenser
Frequency Response: 40 Hz - 20 kHz
Polar Pattern Cardioid: Hypercardioid, Omni,
Supercardioid
Output Impedance: 150 ohms
Sensitivity: 10 mV (C/HC), 12 mV (O),
18 mV (S) / Pa @ 1k
Signal/Noise Ratio: 73 dB
Equivalent Noise Level: 21 dB (A-weighted)
Maximum SPL: ≥147 dB
Dynamic Range: 126 dB
Power Requirements: 18 - 52 V
Current Consumption: (at 48 Volts): 6.1 milliamps
Connector: 3-pin XLRm
Polarity: Positive pressure on diaphragm
produces positive voltage on
pin 2 relative to pin 3 of output
XLR connector
Materials / Finish: Machined Brass / Black Finish
Weight: 28 g / 1 oz
Length: 67 mm / 2.6 in