Audix M1280BHC, MIC, COND, MICRO, 12mm H-CARD,25' CBL,2, Condenser Hypercardioid Microphone (Black)
Vendor: Audix
Available
Audix M1280BHC, MIC, COND, MICRO, 12mm H-CARD,25' CBL,2, Condenser Hypercardioid Microphone (Black)
The Audix M1280BHC is a Condenser Hypercardioid Microphone from Audix. This Audix M1280BHC has a features of fully integrated pre-amp and detachable cable, and it has a complete immunity from RF interference caused by cell phones and GSM devices. The Audix M1280BHC is equipped with a hypercardioid capsule and is also available with omni or shotgun capsules. The Audix M1280BHC microphones has a very wide frequency response and can be used in a wide variety of live, studio and broadcast applications. It can be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences, and presentations.
Audix M1280BHC Product Features
- Lightweight, small profile
- Miniaturized pre-amp circuitry
- No external power adapter needed
- 12mm gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Made in the USA
Applications
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, presentation, podium
- Cymbals, percussion
- Acoustic guitar
Transducer Type | Condenser |
Frequency Response | 40 Hz to 20 kHz |
Polar Pattern | Hypercardioid |
Output Impedance | 150 Ohms |
Sensitivity | 10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k |
S/N Ratio | 73 dB |
Equivalent Noise Level | 21 dB (A-weighted) |
Maximum SPL | ≥147 dB |
Dynamic Range | 126 dB |
Power Requirements | 18 to 52 V |
Connector | 3-pin XLRm |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
Material | Machined brass |
Length | 2.6" (67 mm) |
Weight | 1 oz (28 g) |