Shure AD4D-DC Two-Channel Digital Wireless Receiver (A,B,C)
Vendor: Shure
Available
Shure AD4D-DC / AD4Q-DC Dual or Quad-Channel Digital Wireless Receiver (A,B,C)
Frequency:
- AD4D-DC=-A AD DUAL CH DC Rx L/PTS 470-636 MHz
- AD4D-DC=-B AD DUAL CH DC Rx L/PTS 606-810 MHz
- AD4D-DC=-C AD DUAL CH DC Rx L/PTS 750-960 MHz
- AD4Q-DC=-A AD QUAD CH DC Rx L/PTS 470-636 MHz
- AD4Q-DC=-B AD QUAD CH DC Rx L/PTS 606-810 MHz
- AD4Q-DC=-C AD QUAD CH DC Rx L/PTS 750-960 MHz
The Shure AD4D-DC / Shure AD4Q-DC Axient Digital is professionally designed capable of offering both dual and quad receiver options which certainly capable of opening the door to a full range of features, all from high-performance RF all the way to a transparent digital audio. It is made compatible for use along with all AD series and ADX series transmitters.
The AD4D Two or Quad-Channel Digital Receiver is designed for setting a new standard in spectral efficiency. Boasting about its groundbreaking performance features that come including all wide tuning, low latency, and High Density (HD) mode, which totally ensures a solid performance in the most challenging RF environments. Networked control, AES3 + AES67 + Dante™ output, and signal routing options intended for bringing a new level of management and flexibility to your entire workflow.
Note: During the purchase of separate wireless components, please carefully match their frequency bands for ensurng the proper system operation.
FEATURES
- Works with Axient® Digital Wireless Systems
- Features networked control and signal routing options, plus mobile monitoring and control capabilities
- Available with or without accessories
- Wide tuning range up to 184 MHz
- True digital diversity reception per channel for drop-out resistance
- Networked control with Wireless Workbench® software and ShurePlus™ Channels iOS app
- Front panel headphone jack enables Dante™ Cue and Dante™ Browse monitoring
- Configurable Ethernet switch for redundant Dante or AES67 digital output
- AES3 output
- Channel Quality meter displays RF signal-to-noise
- Locking AC connectors
- DC module version available to support redundant power
Wireless Technology | Digital UHF |
Number of RF Channel Frequencies | 6640 |
Diversity | True Digital Diversity |
RF Frequency Band |
A: |
RF Bandwidth | 166 MHz |
Frequency Step Size | 25 kHz |
Max Operating Range | 328.1' / 100 m |
Max Transmitters per Band | 120 |
Latency | 2 to 2.9 ms (Selectable) |
Modulation | Proprietary |
Receiver Type | Rackmount |
Mounting Options | Rackmount (with Included Hardware) |
Rackmount Size | 1 RU (Full Rack) |
Antenna | 2 x 1/2 Wave External, BNC (Rear-Mount) |
Antenna Bias Voltage | 12 to 13 VDC, 150 mA (per Antenna) |
Number of Audio Channels | 2 |
Audio I/O | 2 x XLR 3-Pin Male Balanced Output 1 x XLR (AES3) 3-Pin Male Output 2 x 1/4" TRS Female Balanced Output 1 x 1/4" TRS Female Headphone Output |
Gain Range | -18 to +42 dB (1 dB Steps) |
Pad | 30 dB |
Audio Output Level | XLR Outputs: +18 dBV (Line Level) XLR Outputs: -12 dBV (Mic Level) 1/4" Outputs: +8 dBV |
Frequency Response | 20 Hz to 20 kHz ±1 dB (Dependent on Mic) |
Network I/O | 4 x RJ45 (1 Gb/s) |
Network Protocols | DHCP, Dante, Manual IP |
Word Clock I/O | 1 x BNC Input 1 x BNC Through |
Impedance | XLR Outputs: 100 Ohms (Balanced) |
Approximate RF Sensitivity | -98 dBm |
Adjacent Channel Isolation | >70 dB |
Spurious | Rejection: >80 dB |
Power Requirements | AC Input, DC Input |
AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 0.68 A |
Display & Indicators | 1 x Backlit LCD (AF Level, Battery Status, Channel, Frequency, Menu Navigation, Sync) |
Housing | Steel |
Operating Temperature | 0 to 122°F / -18 to 50°C |
Storage Temperature | -20 to 149°F / -29 to 65°C |
Dimensions | 19 x 1.7 x 13.1" / 483 x 44 x 333 mm (without Mounting Hardware, Antennas) |
Weight | 10.1 lb / 4.6 kg (without Antenna) |