SE Electronics DM1-MIC-PRE-U DYNAMITE INLINE PREAMP

Vendor: SE Electronics
SE Electronics DM1-MIC-PRE-U DYNAMITE INLINE PREAMP The SE Electronics DM1-MIC-PRE-U Dynamite is professionally designed as an active inline preamp created capable of providing +28 dB of gain intended for ribbon or dynamic microphones. Simply insert the DM1...
$119.19 $169.99
Title

SE Electronics DM1-MIC-PRE-U DYNAMITE INLINE PREAMP

The SE Electronics DM1-MIC-PRE-U Dynamite is professionally designed as an active inline preamp created capable of providing +28 dB of gain intended for ribbon or dynamic microphones. Simply insert the DM1 between your microphone and preamp for boosting the signal from passive mics without adding noise or coloration.

THE PERFECT COMPANION FOR PASSIVE MICS

For decades, condenser microphones have been the go-to choice for use in recording intimate performances, however they are not always providing the desired color and character. Sometimes a record calls for the dark, smokey tones of a vintage ribbon mic, or the punchy midrange of a dynamic mic. But trying to capture quiet performances often results in weak, noisy signals — until now.

The DM1 is created as the perfect way for boosting the signal from a passive mic. With a cutting-edge, Class A design and hand-selected high-quality FETs, the DM1 comes offering a minimal self-noise. It is equipped along with dedicated output buffer amplifier, the DM1 consistently capable of delivering +28 dB of gain, regardless of the connection load.

ROAD-WORTHY RELIABILITY

It comes featuring the lowest output impedance in its class, the DM1 is possible to drive long cable runs without RF interference, buzz and hum—which allows you for running the lines from the stage to FOH or to far-off iso-booths in the studio.

The DM1 comes featuring a rugged, roadworthy, all-metal design that comes with along top-of-the-line manufacturing standards, which provides a rock-solid reliability demanding on-stage applications or in difficult environments.

For best results, it is recommended that you plug the DM1 directly into the output of your microphone. While you can connect a microphone to the DM1 using an XLR cable, shorter cables will result in better performance.

FEATURES:

  • +28 dB of clean, consistent gain designed for neutral, balanced sound quality - the perfect way to boost the signal of a passive microphone, gain stays consistent regardless of connected load providing significantly improved level to your mic preamp for proper gain staging
  • Sophisticated Class-A electronics - state of the art electronics and high-grade FETs provide supremely low noise and transformerless design provides pristine sound quality and the lowest noise in its class
  • Dedicated output buffer amplifier provides +28 dB output independent of load impedance or cable length with extremely low output impedance - drives long cable runs and can reduce susceptibility to RF interference, buzz & hum
  • Gold-plated XLR connector for loss-free and reliable signal connection
  • Slim, rugged all-metal housing with premium finish
  • efficient rejection of any electrical interference and noise high-quality finish ensures a great look for many years, slim design allows for easy placement in the studio or on stage
  • Frequency Range: 10Hz - 120,000Hz (-0.3 dB)
  • Gain: 28 dB (load 1kOhms)
  • Max Output Level (0.5% THD): 8.3 dBV (2.6 V)
  • Output Noise Level: 9 μV (JIS-A)
  • Power: 48V  according to IEC 61938
  • Electrical Impedance: 135 Ohms
  • Recommended Load Impedance: >1K Ohms
  • Current consumption: 3.0mA
  • Connectivity: 3-pin male/female XLR connector
  • Dimensions: Diameter (0.75 in) Length (3.76 in)
  • Weight: 80g (2.82 oz)