Manley MMSSLCHP Manley Stereo Variable Mu® Mastering Version

Vendor: Manley
Manley MMSSLCHP Manley Stereo Variable Mu® Mastering Version VARIATIONS: MMSSLCHP - Manley Stereo Variable Mu MMSSLCHPMS - with MS Mod option MMSSLCHPTBAR - with T-Bar Mod option MMSSLCHPMSTBAR - “The Works” includes MS Mod & T-Bar Mod...
$5,749.00
Style

Manley MMSSLCHP Manley Stereo Variable Mu® Mastering Version

VARIATIONS:

  • MMSSLCHP - Manley Stereo Variable Mu
  • MMSSLCHPMS - with MS Mod option
  • MMSSLCHPTBAR - with T-Bar Mod option
  • MMSSLCHPMSTBAR - “The Works” includes MS Mod & T-Bar Mod

The Manley MMSSLCHP is a professionally designed Stereo Variable MU Limiter Compressor Mastering Version made by Manley Labs and it is a dynamic signal processor with the use of a 5670 dual-triode tube intended for peak reduction and compression. The tube is constantly re-biased by the vacuum tube rectified side-chain control voltages, which results in a smooth change in gain. This mastering version is capable of replacing all conductive plastic pots that comes along with Greyhill rotary switches. The 1% metal-film resistors on the Greyhill switches not only capable of providing recallability, but also capable of delivering an improvement in sound quality.

The compressor setting comes offering a soft-knee 1.5:1 ratio, and at the same time the limit mode is capable of offering a sharper knee that comes along with ratios ranging from 4:1 to 20:1. That comes with higher limiting settings, the knee will start to soften. Distortion effects is possible to be achieved by turning up the input and lowering the output and at the same time with the use of little or no compression. The side-chain high-pass filter comes using a 1-pole, 6 dB/octave filter that is capable to attenuate 1 to 3 dB at 100 Hz and 4 to 6 dB at 50 Hz. Once engaged, the compressor / limiter will not respond as strongly to low frequency content and will prevent audible "pumping" by the time the processing bass-heavy music.

The input of the Variable MU is ganged, but still capable of processing two independent channels that comes along with separate threshold and output controls. With the link switch engaged, the unit is possible to operate in true stereo mode and excels at processing 2-track, final mix, or mastering compression and limiting. Handmade in the USA, the unit is housed in a 2U steel chassis with a CNC-machined 1/4" faceplate that is also inlaid with laser-engraved inserts. The Variable MU ships with an IEC power cable.

  • Stepped Greyhill rotary switches with 1% precision metal-film resistors
  • Manley input and output transformers with nickel laminations in mu-metal cases
  • Balanced inputs and outputs (600 Ω)
  • Independently regulated B+ and heater supplies
  • Bypass Switch: Hardwire true bypass
  • Input Attenuator: -4 to +4 dB stepped switch
  • Stepped Attack: 15 to 90 ms
  • Threshold: 24 step range
  • 5-Step Recovery Switch: 0.2, 0.4, 0.6, 4, 8 sec
  • Compression Ratio: 1.5:1
  • Limit Ratio: 4:1 to 20:1
  • Large Illuminated Sifam Meters: Displays the amount of dB gain reduction
  • Stereo link switch
Number of Channels 2
Inputs 2 x XLR transformer balanced (600 Ω)
Outputs 2 x XLR transformer balanced (600 Ω)
Input Level Input Level Switch: -4, -2, 0, +2, +4 dB
Output Level Output Level Switch (24 Detents): -11 to 0 dB (1/2 dB steps)
Compression Threshold Threshold Switch (24 Detents): -11.5 to +1 dB
Compressor (1/4 dB Steps): 6 dB range
Limiter (1/2 dB Steps): 12 dB range
Ratio Compressor: 1.5:1
Limiter: 4:1 to 20:1
Attack Time Variable Attack: 15, 20, 25, 30, 35, 40, 50, 60, 70, 80, 90 ms
Release Time Recovery 5 Steps (5 Detents): 0.2, 0.4, 0.6, 4.0, 8.0 sec
Maximum Output Level +30 dBu (26 Vrms) 26 dB Headroom
Make-up Gain +35 dB
Frequency Response 20 Hz to 25 kHz
THD & Noise Noise Floor: -85 dB typical
Meter Illuminated Sifam meters
Tubes per Side Fully Differential All-Tube Circuitry: 5670, 5751 (or 12AX7), 7044 (or 5687), & 12AL5
High Pass Filter HP SC: High-Pass Side-Chain Filter:
-1 to -3 dB @ 100 Hz
-4 to -6 dB @ 50 Hz
Rackmountable 2 U
Power Supply 120 VAC, 80 W, 60 Hz
Fuse Mains Fuse Value: 1.25 A
Mains Fuse Type: MDA or MDL SLO-BLO Time Delay: 1-1/4 x 1/4"
Dimensions (WxHxD) 19.0 x 3.5 x 10.0" / 48.3 x 8.9 x 25.4 cm
Power Transformer protrudes 3.5" / 8.9 cm out back of chassis
Weight 14.0 lb / 6.4 kg