Community R6-BASSHORN 6 X 12" Horn Loaded LF Subwoofer System

Community R6-BASSHORN 6 X 12" Horn Loaded LF Subwoofer System

The Community R6-BASSHORN is a professionally designed high output, high power low frequency system that is created for long throw applications that are use in larger stadiums, arenas, and other large scale facilities that are requiring the high output levels that comes along with superb clarity. The R6- BASSHORN will array along with effectively increased pattern control and, through mutual coupling, that comes with higher efficiency at lower frequencies.

The R6-BASSHORN comes along with six, high sensitivity 12- inch drivers that comes along with powerful, heavy-duty motor structures mounted in a one-piece fiberglass, 42 Hz flare rate horn that is made surrounded by a rigid fiberglass weatherproof cap.

The R6- BASSHORN is professionally designed as an optimum low frequency complement for horning the loaded full-range systems (such as the R2) in terms of its output level, pattern control, frequency range and physical dimensions. Proper implementation that comes along with a full-range system are requiring an electronic crossover and alignment signal delay along with appropriate equalization.

Features

• All-weather, fiberglass enclosure
• Horn loaded
• High efficiency, high output
• Six high powered 12" drivers
• Excellent transient response
• Predictable LF pattern control
• Five-year product warranty / Fifteen-year enclosure warranty

• Loudspeaker Type: Low frequency bass horn system
• Operating Range:
• 45 Hz to 500 Hz
• 55 Hz to 450 Hz (+/- 4 dB)
• Max Input Ratings: 1200W continuous, 3000W program, 89 volts RMS, 155 volts momentary peak
• Recommended Power Amplifier: 2500W to 3600W @ 4 ohms
• Sensitivity (1W/1m): 108 dB SPL (50 Hz - 315 Hz 1/3 octave bands)
• Maximum Output: 139 dB SPL / 146 dB SPL (peak)
• Nominal Impedance: 4 Ohms
• Minimum Impedance: 3.9 Ohms @ 175 Hz
• Nominal –6dB Beamwidth: 90° H x 60° V @ 315 Hz
• Axial Q / DI: 9.1 / 9.6, 315 Hz
• Recommended Signal Processing:
• 150 Hz to 300 Hz electronic crossover
• 40 Hz high pass filter
• Drivers: 6 x 12" Ferrofluid-cooled
• Driver Protection: None
• Input Connection: 16-2 SJOW (12 ft / 4m)
• Controls: None
• Enclosure: Hand-laminated fiberglass, light gray gelcoat
• Mounting/Rigging Provisions:
• (4) 1/2-13 threaded mounting points
• (10) 5/16" holes on horn flange
• Grille: 3-layer Weather-Stop™ grille, black finish
• Environmental Performance: IEC529 IP55W rating with a minimum 5-degree downward aiming angle
• Required Accessories: Digital Signal Processor
• Supplied Accessories: None
• Optional Accessories: None
• Dimensions:
• Height: 49 inches (1245 mm)
• Width: 37 inches (940 mm)
• Depth: 43.5 inches (1105 mm)
• Weight: 204 lbs (92.6 kg)