Martin Audio SXP118, Compact, high-performance 18" Powered Subwoofer Black & White

Vendor: Martin Audio
Martin Audio SXP118, Compact, high-performance 18" Powered Subwoofer Black & White Martin Audio SXP118 is a self-powered system, the SXP118 incorporates a Class D amplifier, DSP, and Dante™ digital audio networking — simplifying set-up, enhancing...
$3,250.00
Color
Black
White

Martin Audio SXP118, Compact, high-performance 18" Powered Subwoofer Black & White

Martin Audio SXP118 is a self-powered system, the SXP118 incorporates a Class D amplifier, DSP, and Dante™ digital audio networking — simplifying set-up, enhancing control, and eliminating amplifier racks. The onboard amplifier delivers 2000W peak output to the driver and its switched-mode power supply auto-ranges to global mains voltages from 100 to 240V 50/60Hz. DSP functions — including parametric EQ, delay, muting, gain, and preset selection — can be controlled over Ethernet from a PC or Windows® tablet via intuitive VU-NET™ proprietary software. For simple set-ups, ‘plug-and-play’ presets for operation with the CDD-LIVE 8, CDD-LIVE 12, or CDD-LIVE 15 — as well as a user-defined preset — can be selected on the rear panel, instead of using computer control. Additional presets provide the appropriate settings for the rear-facing subwoofer in a cardioid pair. As an alternative to its analog inputs, the Martin Audio SXP118 is Dante enabled for digital audio distribution and control over a single CAT5 cable to maintain audio quality however long the cable run. The enclosure is constructed from multi-laminate plywood with a durable polyurea coating and equipped with a perforated Zintec grille, twin grab handles, skids, M10 flying inserts, and a threaded pole socket. The product is supplied as standard without cabinet wheels, but they are available as an accessory. By adding the input board cover accessory, the subwoofer is fully weather resistant and suitable for permanent outdoor usage.

Martin Audio SXP118 Main Key Features

  • Compact, self-powered subwoofer
  • 1 x 18” (460mm) driver with 4” (100mm) voice coil
  • Onboard Class D amplification and DSP
  • Dante™ Digital Audio networking
  • Global mains operation with Power Factor Correction
  • Tour-grade plywood enclosure with flying inserts
  • IP24 rating option with rain cowl
TYPE  Compact, direct-radiating powered subwoofer
FREQUENCY
RESPONSE (3)
 47Hz – 150Hz ±3dB, -10dB @ 41Hz
DRIVER  18” (460mm)/4” (100mm) voice coil, long excursion,
ferrite magnet, waterproof cone
INPUT SENSITIVITY  -20dBu for 100dB SPL (CDD12/15 pre-set)
 -13dBu for 100dB SPL (CDD8 pre-set)
MAXIMUM SPL (4)  132dB continuous / 135dB peak
DISPERSION  Omnidirectional / or Cardioid (paired)
CROSSOVER  Active Presets for CDD Live 8, 12 & 15 mono-pole or  cardioid (paired)
MODULE
AUDIO INPUT
CONNECTORS  Female XLR input, male XLR link output, Dante Audio   Neutrik® Ethercon
ANALOGUE INPUT IMPEDANCE  20 kΩ balanced to ground
MAXIMUM ANALOGUE INPUT LEVEL  24.6 Vpp (+21dBu), over-voltage protected
INTERNAL PROCESSING  Multi-channel DSP, programmable via TCP/IP using   VU-Net software
 PEQ/shelving filters
 Up to 48dB/Oct LPF
 Up to 200ms input delay
 Pre-set selection via a rear panel switch
NETWORK
CONNECTORS  2 x Neutrik® Ethercon
PROTOCOL  TCP/IP and UDP/IP
AMPLIFIER MODULE
TYPE  2 channel switch-mode, class D,
 Bridged Tied
PEAK OUTPUT POWER  2000W total
AVERAGE EFFICIENCY  89%
COOLING  External fan
MAXIMUM AMBIENT TEMPERATURE  40°C (104°F) for full output
POWER SUPPLY
TYPE  Switch mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE  85 – 265V ~ AC, 50 - 60Hz
POWER FACTOR  > 0.98
NOMINAL POWER CONSUMPTION  125W
MAINS CONNECTOR  Neutrik® Powercon True1
MECHANICAL
ENCLOSURE  Extensively braced multi-laminate plywood.
FINISH  Durable Polyurea Coating
PROTECTIVE GRILLE  Black perforated Zintec
FITTINGS  Two skids on base, with mating channels on top
 16 x M8 inserts for optional castors
 M20 top-mounted thread plate for pole mounting
 16 x M10 mounting points
 2x Bar handles, 1 on each side
 4x fittings for optional transit cover
IP RATING  IP24 factory option available
DIMENSIONS  (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors)
 (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors)
WEIGHT  46.5kg (103lbs) w/o castors 50kg (110lbs) with castors