Martin Audio XP15, 15 inches Powered Compact 2-way Loudspeaker System

Vendor: Martin Audio
Martin Audio XP15, 15 inches Powered Compact 2-way Loudspeaker System Martin Audio XP15 featuring a 15” (380mm)/3” (75mm) voice coil LF drive unit, and a 1” (25mm) exit HF compression driver with a...
$1,500.00
Title

Martin Audio XP15, 15 inches Powered Compact 2-way Loudspeaker System

Martin Audio XP15 featuring a 15” (380mm)/3” (75mm) voice coil LF drive unit, and a 1” (25mm) exit HF compression driver with a 1.75” (44mm) polyimide diaphragm. With an accurately-defined 80° x 50° coverage pattern, it merges very high output capability with exceptional sonic performance and low-frequency impact. It's Class D amplifier module delivers 1000W LF + 300W HF peak output to the drivers, which are independently protected by RMS and peak limiters. Onboard DSP functions are controlled by a rotary encoder interface and multi-function, easy-to-use color display on the rear panel. DSP features include crossover function, a three-channel mixer with three-band EQ on each input channel, and a choice of three voicing preset and operating modes for flexible operation without external processing. The symmetrical, multi-angle enclosure is manufactured from birch and poplar plywood and finished in textured black paint. It is fitted with M8 inserts for eyebolt suspension plus a pole-mount socket with a removable cap. Its cloth-backed protective steel grille is a spring-fit into the sides of the enclosure for easy access to rotating the HF horn.

Martin Audio XP15 Main Features

  • High output, self-powered, portable two-way system
  • 1300W of Class D amplification
  • Global power supply with PFC (Power Factor Correction)
  • Onboard DSP with a rotary control interface
  • Multi-function display for metering, control, and function selection, Three-channel mixer
  • Three-band channel EQ, plus HPF (Ch1/2)
  • Independent LF and HF peak and RMS limiters
  • Three speaker mode and voicing presets
  • Bluetooth® control and streaming option
  • Durable plywood enclosure
  • User-rotatable 80° x 50° HF horn
  • Vertical and horizontal mounting options
  • Symmetrical multi-angle enclosure for PA or stage monitor use
  • Screw-free, cloth-backed steel grille
  • Integral ergonomic handles
  • Mounting options include pole-mount and flying inserts
ACOUSTICS
TYPE High output, self-powered two-way system
FREQUENCY RESPONSE (5) 55Hz – 20kHz ±3dB -10dB @ 45Hz
DRIVERS
  • LF: 15” (380mm)/3” (75mm) voice coil ferrite motor system
  • HF: 1” (25mm) exit/1.7” (44mm) voice coil, polyimide dome compression driver
MAXIMUM SPL (9) 125dB continuous / 131dB peak
DISPERSION 80° H x 50° V (user-rotatable)
CROSSOVER 2kHz active, 24dB/octave
MODULE
AUDIO IN/OUT
INPUT CONNECTORS 2 x female XLR/ 1⁄4” jack combo
MIC/LINE INPUT IMPEDANCE 8 kΩ balanced
1⁄4” JACK TS INPUT IMPEDANCE 1 MΩ unbalanced
MIX OUTPUT CONNECTOR 1 x male XLR
MIX OUTPUT IMPEDANCE 600Ω balanced
INTERNAL PROCESSING
INPUT CHANNEL EQ 3-band on each channel plus HPF (Ch1/2)
SPEAKER EQ 3 speaker mode/voicing presets
PROTECTION LF and HF Peak and RMS limiting, amplifier thermal protection
AMPLIFIER MODULE
TYPE 2 channel switch-mode, class D
PEAK OUTPUT POWER 1300W total
1000W LF, 300W HF
AVERAGE EFFICIENCY 89%
COOLING External convection cooled
MAXIMUM AMBIENT TEMPERATURE 35°C (95°F) for full output
POWER SUPPLY
TYPE Switch-mode, the fixed frequency with PFC
AC INPUT OPERATING RANGE 100-240V ~ AC, 50 - 60Hz
POWER FACTOR > 0.98
NOMINAL POWER CONSUMPTION 550W Max
MAINS CONNECTOR 3-pin IEC
MECHANICAL
ENCLOSURE Multi-angle birch/poplar ply
FINISH Black textured paint
PROTECTIVE GRILLE Black perforated steel with scrim cloth backing
FITTINGS 13 x M8 inserts, pole-mount socket, 2 x pocket handles
DIMENSIONS (W) 427mm x (H) 690mm x (D) 407mm
(W) 16.8in x (H) 27.2 x (D) 16.0in
WEIGHT 26kg (57lbs)